View previous topic :: View next topic |
Author |
Message |
Wolf123
Joined: 16 Jul 2007 Posts: 3
|
Posted: Tue Jul 17, 2007 3:36 am Post subject: Problems with new DREAMBOX Remote URC-39930RJ0-03 |
|
|
Good morning.
I have a "Dreambox DM600PVR" with the new DREAM Universal Remote-Contoller URC-39930RJ0-03
And my TV is a "Medion-MD 21032" therefor is no Code in the Remote.
I think no problem it gives IR.exe and so on, and make me a JP1 interface... Nothing (no contact).
Look anyway to the internet and found it gives more then JP1 eg. JP1.x ahhh... that is it...
Make me a JP1.x interface, start IR.exe 703, but also nothing...
Load "JP1xTEST.exe" programm from Tommy Tyler and check the interface, all OK.
Fount A JP1.X COMPATIBLE REMOTE ON COM1!
Signature is 10381038
Memory Adress is $E000
Memory size is $1C00 (7168)
Now my question:
if i start IR.exe and check interface it write:
"Failed to open JP1.x interface".
Sometimes it write:
"Found JP1.x succest"
But if i then press "Download from Remote" it write:
"Failed to open JP1.x interface" or sometimes it write: "Read failed -1"
I have no idea what is wrong...
Have some one connect to this Remote-Controller an now what is my problem.
Regards
Wolfgang from Berlin (Germany) |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21211 Location: Chicago, IL |
Posted: Tue Jul 17, 2007 7:34 am Post subject: |
|
|
Do you have batteries in the remote? That's all I can think of. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
xmasmc
Joined: 18 Sep 2007 Posts: 3 Location: Vienna |
Posted: Tue Sep 18, 2007 6:07 pm Post subject: problems with JP1.x |
|
|
Hello,
I have the same problem as Wolf123
I built the JP1.x Interface with jp1xtest everything is ok
jp1xtest version 0.00
**** FOUND A JP1.x COMPATIBLE REMOTE ON COM1! ****
Signature is 10381038
Memory address is $E000
Memory size is $1C00 (7168)
When I try with IR7.05 every time I get the message:
Failed to open JP1.x interface
PLEASE HELP |
|
Back to top |
|
|
Tommy Tyler Expert
Joined: 21 Sep 2003 Posts: 412 Location: Denver mountains |
|
Back to top |
|
|
xmasmc
Joined: 18 Sep 2007 Posts: 3 Location: Vienna |
Posted: Mon Sep 24, 2007 1:36 am Post subject: JP1.x Interface problem solved |
|
|
Special thanks to binky123, he solved the problem:
Now I use IR7.06 with updated jp12serial.dll driver that works.
I had one more problem, when I download from remote, I get the message:
There is a conflict at fixed data Address $0200. Do you want to replace the existing data with the fixed data?
Also binky123 solved the problem:
I was using an old version of the RDF for the dreambox 7020 remote.
With this one it works:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3660
Special thanks to binky123 for the fast and perfect help. |
|
Back to top |
|
|
twons
Joined: 02 Oct 2007 Posts: 2
|
Posted: Tue Oct 02, 2007 9:15 am Post subject: |
|
|
>> "Failed to open JP1.x interface"
For others having this problem and the new driver version doesn't help; I would suggest reading Tommy Tyler's troubleshooting tips posted in this thread. If you still can't get it working, pay special attention to the last paragraph of section 6.
I have my JP1 setup installed on a USB drive; when I plug the USB drive, JP1 cable & remote into my Dell D610 Latitude, I can't get JP1 to respond no matter what config I use. The lights on the remote flicker but it still produces an error.
When I plug the exact same hardware into my Dell CPX-J Latitude, it works like a charm. |
|
Back to top |
|
|
|