JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

URC7562

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
mkazl2003



Joined: 15 Apr 2007
Posts: 4

                    
PostPosted: Thu Apr 19, 2007 2:49 pm    Post subject: URC7562 Reply with quote

Wonder if anyone can help with the programing of a 7562 useing ir620, keep getting error code N06 parram 0 saying [did not receive response from remote after sending bus addres] I use the same simple pararell connection as I use on the urc7550 with wich it works fine, any sugestions would be welcome.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Thu Apr 19, 2007 2:53 pm    Post subject: Reply with quote

Have you tried all the different battery combinations with the 7562...
http://www.hifi-remote.com/forums/viewtopic.php?t=5849
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
mkazl2003



Joined: 15 Apr 2007
Posts: 4

                    
PostPosted: Fri Apr 20, 2007 3:34 pm    Post subject: URC7562 Reply with quote

Hi Rob thanks for replying, yep tried different batterys in different states of discharge but still no luck with either of my 7652s. Followed the simple parallel interface rev4.1 instructions and used 1k resistors although 10k were shown in the schematic so wonder if its worth experimenting with different values ?
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Fri Apr 20, 2007 6:00 pm    Post subject: Re: URC7562 Reply with quote

mkazl2003 wrote:
Followed the simple parallel interface rev4.1 instructions and used 1k resistors although 10k were shown in the schematic so wonder if its worth experimenting with different values ?

Where did you find an old 4.1 version of the Simple design? The current version is version 5.0. 1k is the correct value for the resistors.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
mkazl2003



Joined: 15 Apr 2007
Posts: 4

                    
PostPosted: Sun Apr 22, 2007 4:36 pm    Post subject: urc7562 Reply with quote

All sorted now thanks Rob, waved the soldering iron over the joints on the DB25 must have been a dirty or oxidized joint on one of the resisters as the interface is as old as the instructions I used, downloaded them must be a couple of years ago but got distracted through work comitments, thanks for your help anyway Rob.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control