JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

URC-8203 RDF File needed
Goto page 1, 2, 3  Next
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
sensismile



Joined: 21 Jul 2004
Posts: 30

                    
PostPosted: Fri Apr 20, 2007 5:13 am    Post subject: URC-8203 RDF File needed Reply with quote

Hi all,

for my bedroom I just bought a 8203 Kameleon. To get it programmed I ordered a JP1.x cable. Now I just discovered that there is no RDF File available for the 8203. Is it possible for me to create the RDF File on my own and maybe create the image and map for RM too ?

Thanks and greetings from Germany,
Sensi
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Fri Apr 20, 2007 9:06 am    Post subject: Reply with quote

I don't know why there isn't an RDF out there, let me look into it.

In the meantime, could you post an IR file for it.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!


Last edited by The Robman on Fri Apr 20, 2007 9:25 am; edited 1 time in total
Back to top
View user's profile Send private message Visit poster's website
sensismile



Joined: 21 Jul 2004
Posts: 30

                    
PostPosted: Fri Apr 20, 2007 9:20 am    Post subject: Reply with quote

Hi Robman,

yes I tried it and IR tells me it has no definition for 10261026 . If there is a nother definition on the Raw Tab I don't know where to look for it.

The RAW Data does almost only contains $FF. Only these three lines are not filled with $FF:

0000: 31 30 32 36 31 30 32 36 32 CD 00 25 10 51 23 01
0010: 30 40 00 07 01 02 FF FF FF FF FF FF FF FF FF FF

and

0400: EE 04 EE 04 00 00 FF FF FF FF FF FF FF FF FF FF

Maybe this helps ?

Thanks
Sensi
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Fri Apr 20, 2007 10:18 am    Post subject: Reply with quote

What's the address of the last line (ie, the first 4 digits)?

I've thrown together a quick RDF largely based on the URC-8206 RDF here:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4477

You'll need to experiment to see if the button names are correct, as they're really the URC-8206 button names. I guessed at the Settings based on the data posted.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
sensismile



Joined: 21 Jul 2004
Posts: 30

                    
PostPosted: Fri Apr 20, 2007 10:23 am    Post subject: Reply with quote

Hi again,

the "last" adress is

11F0

Sensi
Back to top
View user's profile Send private message
sensismile



Joined: 21 Jul 2004
Posts: 30

                    
PostPosted: Fri Apr 20, 2007 10:30 am    Post subject: Reply with quote

HI again,

the 8201 and 8203 are onyl half-height !

http://www.oneforall-int.com/index.html?pag=39&prodnr=24

here you can see a picture of my remote. The Headline says it's the 8201 but the picture is actual from the 8203. They exchanged the pictures fron 8201 and 8203.

Sensi

P.S: Will try the rdf file after shower ..
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Fri Apr 20, 2007 10:34 am    Post subject: Reply with quote

Try downloading from the remote after you have saved the RDF in your RDF folder and tell me if you get the message "The EEPROM size detected by IR (???) does not match the value specified in the RDF (???). The value in the RDF will be ignored."

If you do, I'd like to know what the ??? values are.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
sensismile



Joined: 21 Jul 2004
Posts: 30

                    
PostPosted: Fri Apr 20, 2007 10:47 am    Post subject: Reply with quote

Well no - no errormessage here !

I'm using IR.exe 7b3 .

Ok I will play around a bit and tell you if it works.

BTW a question - If I have a deviceupgrade for a SAT/CBL Type Device (in my case MediaMVP) and the remote does only have TV/VCR/DVD as possible device classes, is it possible to get this upgrade working on the remote ?

Thanks
Sensi
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Fri Apr 20, 2007 11:02 am    Post subject: Reply with quote

Yes, but you would need to create the upgrade as a TV, VCR or DVD upgrade.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Fri Apr 20, 2007 11:08 am    Post subject: Reply with quote

Btw, I can't tell where the learning section starts in this remote, so could you learn something and then download again. I'm looking to see which part of the data changes.

Also, could you initialize the memory to all zeroes, then do a 981 reset, then download. This will create what we call a "virgin" file which is also useful in getting the RDF right.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
sensismile



Joined: 21 Jul 2004
Posts: 30

                    
PostPosted: Fri Apr 20, 2007 11:37 am    Post subject: Reply with quote

OK here is the firs one - a virgin file - I hope this is ok.

Next will be the learning ... brb

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4478

Sensi
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Fri Apr 20, 2007 11:45 am    Post subject: Reply with quote

You initialized the file to all FFs before doing the 981, as FF is the terminator used by this remote, I need it initialized to all zeroes so I can see the FF terminators.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
sensismile



Joined: 21 Jul 2004
Posts: 30

                    
PostPosted: Fri Apr 20, 2007 12:03 pm    Post subject: Reply with quote

Well .. I initialized the remote to $00, then the 981 reset and raw downloaded the data ..


THis time I made only the $00 init and downloaded the RAW date before doing the 981 reset.

It looks almost the same ..

here's the file

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4479

Sensi
Back to top
View user's profile Send private message
sensismile



Joined: 21 Jul 2004
Posts: 30

                    
PostPosted: Fri Apr 20, 2007 1:13 pm    Post subject: Reply with quote

OK ,
the learning space starts at $0800

0800: 10 20 1D 00 D3 03 00 59 FF A5 00 8E 4B 90 00 59
0810: 4B 60 1A 12 22 22 22 22 22 22 22 22 22 22 22 20


But I don't get the whole remote filled up with $00 - maybe a problem with IR7b3 and JP1.x ??

Sensi
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Fri Apr 20, 2007 1:43 pm    Post subject: Reply with quote

Great, that's where I had guessed it would be, so the RDF doesn't need to change.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Goto page 1, 2, 3  Next
Page 1 of 3

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control