Page 1 of 1
what to do with hex
Posted: Mon Jan 29, 2007 5:36 pm
by abdulaldu
I upload learn codes for a dvd using urc8910 and they all in hex and some in few lines. I need to make a binery file for slingbox.. can any body help ?
Posted: Tue Jan 30, 2007 2:44 am
by Capn Trips
Upload your learned IR file to the diagnosis area and provide a link to it here.
what to do with hex
Posted: Tue Jan 30, 2007 7:47 am
by abdulaldu
Posted: Tue Jan 30, 2007 7:59 am
by johnsfine
I think those are all bad learns. I assume the learned codes don't work to operate the DVD.
I think you are pressing the original remote button too soon in the learning process.
Edit: See the link in the post below (which I didn't have handy when I replied).
See the text after step 5 in those instructions.
What I mean by "too soon" is pressing the button on the DVD remote before the 8910 displays "LEARNING".
Posted: Tue Jan 30, 2007 8:42 am
by Capn Trips
Capn Trips
Posted: Tue Jan 30, 2007 11:32 am
by abdulaldu
100% right I got normal codes now ....THANKS
Posted: Wed Jan 31, 2007 5:26 am
by Capn Trips
I suggested:
Capn Trips wrote:Upload your learned IR file to the diagnosis area and provide a link to it here.
I appreciate your PM, but you are more likely to get quicker help if you use the forums, so
HERE is the file you sent me via PM, which is the bad learns.
Your last post indicates that you were able to decode it, so I'm not sure what your question is now.
Posted: Wed Jan 31, 2007 10:42 am
by abdulaldu
Capn Trips
I have no question .. I am good . I reprogram the remote following your direction upload it and made a working binary file . thanks again