Page 1 of 1
Magnasonic TV 27" model: MCT2710
Posted: Sun Jan 28, 2007 3:58 am
by buzywomen
1. Device: Magnasonic MCT2710
2. Type of device: tv
3. Year: 2006
4. JP1/UEI Remote model: rs 15-1994
5. Do you have a JP1 cable? yes
6. Still have original remote? yes
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? yes
9. Partially working setup code? no
10. Learning remote question? no
need code or files for magnasonic tv 27" model: MCT2710
I have RS 15-1994 with jp1 cable.
and
URC-10820B00 no jp1.2 cable presently.
tanks all.
Re: need code or file for magnasonic tv 27" model: MCT
Posted: Sun Jan 28, 2007 4:52 am
by Capn Trips
Capn Trips wrote:... read the Beginners' readme's (Sticky post in the Beginners' Forum - linked below in my sig) and if you still are still confused, upload the IR file to the diagnosis area and provide a link to it here, and someone will give you a hand converting it.
Posted: Mon Jan 29, 2007 4:40 am
by buzywomen
tank Capn Trips
i have learned and posted in diagnostic area.
Posted: Mon Jan 29, 2007 5:51 am
by Capn Trips
Did you read the beginners' documents? What part of building your own upgrade do you not understand?
Also, it's very hard to find a file amongst the hundreds located in the diagnosis area, that's why we ask for
links.
Posted: Mon Jan 29, 2007 5:55 am
by Capn Trips
These are very starightforward NEC1 Device Code 8 signals. You can use KM or RM to build an upgrade.
You can also try built-in code TV/0180 and see if it works.
Posted: Mon Jan 29, 2007 6:14 am
by Capn Trips
Try this.
Code: Select all
Upgrade Code 0 = 14 9C (TV/1180) keymap-master Device Upgrade (KM v9.07)
5A 05 76 FE F9 00 EF EF A7 87 F7 27 07 B7 D7 8F
CF 25 27 07 87 A7 CF 5D 0F 97 7D 95
KeyMoves
30 F3 14 9C CD«surround»
End
I don't know what functions (Timer; Picture Adjustment; Picture Style) you had learned to what buttons, so I just assigned them to the same buttons you learned them to, plus a few other apparent ones. You can't assign a function to the scan/fav button, so I put that on the Program/Guide button.
Posted: Mon Jan 29, 2007 6:18 am
by Capn Trips
tank
Posted: Mon Jan 29, 2007 10:29 am
by buzywomen
tank very for you.
i am sory but i am difficultt in english .
i have study more and used RemoteMaster.v1.74 and full succes made my first uprade device code for my tv
and start my second upgrade device for my pantec mx 2500.
remote master is very easy
tank very very at you.
sorry for my error or incomprehension.
Code: Select all
Upgrade code 0 = 11 0F (TV/0271) TV Magnasonic MCT2710 For RS 15-1994 (RM v1.74)
5A 05 7E BC F9 00 EF EF A7 87 F7 27 07 B7 0F D7
8F CF 27 07 87 A7 5D 0F 97 7D 95
KeyMoves
30 F3 11 0F CD«surround»¦
14 F3 11 0F 61«fav/scan»
End
Re tank for your help
Posted: Mon Jan 29, 2007 11:03 am
by Buzywoman
tank
i have uploded my upgrade device version in the files section and give credit at you for your very good help.
http://www.hifi-remote.com/forums/dload ... le_id=4149
many tank.