View previous topic :: View next topic |
Author |
Message |
EZ Ed
Joined: 22 May 2006 Posts: 31
|
Posted: Fri Sep 22, 2006 6:17 pm Post subject: Directv HR20 |
|
|
I just had this unit installed and after searching for ir codes I found that it used the same as the R15. I tried that without success. Has anyone been able to program a urc 6131 for this device? |
|
Back to top |
|
|
MaskedMan Tivo Expert
Joined: 10 Feb 2004 Posts: 1006 Location: Boone, IA |
Posted: Fri Sep 22, 2006 6:59 pm Post subject: |
|
|
Are sure your HR20 is accepting IR commands and not set to RF? Because the HR20 does use the same IR commands as the R15. _________________ Edmund |
|
Back to top |
|
|
EZ Ed
Joined: 22 May 2006 Posts: 31
|
Posted: Fri Sep 22, 2006 8:35 pm Post subject: |
|
|
MaskedMan wrote: | Are sure your HR20 is accepting IR commands and not set to RF? Because the HR20 does use the same IR commands as the R15. |
I checked setup remote and it's set to IR. I did notice that in the IR.EXE the device for 1377 is set to protocol 162 but Protocol greater than FF is checked perhaps that's the problem. |
|
Back to top |
|
|
EZ Ed
Joined: 22 May 2006 Posts: 31
|
Posted: Sat Sep 23, 2006 8:46 pm Post subject: |
|
|
Well I now have it working after rebuilding the IR file from scratch. The only thing I'm missing now is discrete codes for power on/off I found efc 128/129 at remote central but they don't work. Anyone have the working discrete codes?
Thanks, Ed |
|
Back to top |
|
|
MaskedMan Tivo Expert
Joined: 10 Feb 2004 Posts: 1006 Location: Boone, IA |
Posted: Sat Sep 23, 2006 9:02 pm Post subject: |
|
|
Try these EFc's, ON-014, OFF-006 _________________ Edmund |
|
Back to top |
|
|
bobshults2
Joined: 12 Jul 2005 Posts: 13
|
Posted: Mon Sep 25, 2006 9:29 am Post subject: |
|
|
See new Directv Plus HD DVR HR20 file in File Section, Device Upgrades, Satellite. |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Mon Sep 25, 2006 12:04 pm Post subject: |
|
|
...and HERE's a link. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
EZ Ed
Joined: 22 May 2006 Posts: 31
|
Posted: Mon Sep 25, 2006 3:35 pm Post subject: |
|
|
MaskedMan wrote: | Try these EFc's, ON-014, OFF-006 |
Those worked, Thanks MaskedMan |
|
Back to top |
|
|
EZ Ed
Joined: 22 May 2006 Posts: 31
|
Posted: Mon Sep 25, 2006 3:40 pm Post subject: |
|
|
bobshults2 wrote: | See new Directv Plus HD DVR HR20 file in File Section, Device Upgrades, Satellite. |
Thanks looks great, guess I should have waited a few days .
Question does "30s slip (jump to end)" add a 30 sec skip?
Thanks, Ed |
|
Back to top |
|
|
bobshults2
Joined: 12 Jul 2005 Posts: 13
|
Posted: Mon Sep 25, 2006 4:18 pm Post subject: |
|
|
The "30s slip (jump to end)" code functions like the "advance" key on the original remote. That is, a short key press skips (slips) ahead 30 seconds in a recorded program. A long key press (about 2 seconds) jumps to the end of a recorded program. |
|
Back to top |
|
|
skyhook8
Joined: 17 May 2004 Posts: 8
|
Posted: Sun Oct 22, 2006 3:44 pm Post subject: |
|
|
How would one go about setting up a second remote for the HR20? My second HR20 operates on the "AV1" setting on the original remote and I used "00003" as the programming code.
Thanks for the help. |
|
Back to top |
|
|
MaskedMan Tivo Expert
Joined: 10 Feb 2004 Posts: 1006 Location: Boone, IA |
Posted: Sun Oct 22, 2006 4:24 pm Post subject: |
|
|
skyhook8 wrote: | How would one go about setting up a second remote for the HR20? My second HR20 operates on the "AV1" setting on the original remote and I used "00003" as the programming code.
Thanks for the help. |
The hr20 only has two IR addresses, those are native codes 00001 & 00002. The oem remote can be set to codes 00003 & 00004 but they're useless with hr20 at this time. _________________ Edmund |
|
Back to top |
|
|
skyhook8
Joined: 17 May 2004 Posts: 8
|
Posted: Sun Oct 22, 2006 6:35 pm Post subject: |
|
|
MaskedMan wrote: | The hr20 only has two IR addresses, those are native codes 00001 & 00002. The oem remote can be set to codes 00003 & 00004 but they're useless with hr20 at this time. |
Just double-checked to make sure - Mine is set to 00003. When I programmed it I tried several times over to get it to work with 00001 or 00002 then tried 00003 out of desperation. Only then did it work. My receivers were delivered on Oct 12th so maybe the new ones are different. |
|
Back to top |
|
|
skyhook8
Joined: 17 May 2004 Posts: 8
|
Posted: Mon Oct 23, 2006 8:40 am Post subject: |
|
|
I've been examining my old DirecTivo files and reading about "Fixed Data" and it appears that just changing the fixed data value so that a separate device will be addressed will do the trick.
Is this correct? And, if I use my learning remote to learn one or two keys for the HR20 controlled by the AV1 setting will I be able to pull the fixed data value from that new information?
Am I on the right track or does someone need to slap me around a bit? |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Mon Oct 23, 2006 10:16 am Post subject: |
|
|
I'm sure the info you need can be easily extracted from a learned signal. Without reviewing some old threads, I can't tell you exactly how the learned signal results convert to fixed data. But if that isn't obvious once you have the learned signals, ask again and someone will provide better details. |
|
Back to top |
|
|
|