View previous topic :: View next topic |
Author |
Message |
EZ Ed
Joined: 22 May 2006 Posts: 31
|
Posted: Fri Aug 11, 2006 5:28 pm Post subject: URC-6131 remote Extender Macro problem |
|
|
I have a URC 6131(old) using the extender the following 2 macros don't seem to work.
Key Shift DVD
TV X-Shift-Power; AUD Power 2; TV Shift-5 Shift-Power 1; DVD Shift-Power
Key Shift PVR
TV X-Shift-Power; AUD Power 1; TV Shift-1 Shift-Power 1; PVR Shift-Power
The IR file is here:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3472
Thanks Ed |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Sat Aug 12, 2006 4:04 am Post subject: |
|
|
Unclear what you mean by "Don't work". Does NOTHING get sent? Or does the LED flash, but nothing seems to work? or do SOME of the macro functions work but not others? Have you tried each individual step in the macro separately? Like assign "TV, x-shift-Power" to a button as a shorter macro and see if IT works, similarly for "AUD, Power, 1"
On the face of it, it appears that the Amplifier and DVD (or PVR) parts of the macro should work. Do they power up and line up correctly? But the TV functions seem to not make sense the way you sequence them.
Assuming your notes are correct it appears you're sending signals to the TV while it's OFF. Here is the sequence you are sending in the shift DVD macro:
TV: macro assigning keysets to the TV function
x-shift Power: keymove DISCRETE OFF!?!(WHY?)
AUD: macro assigning keysets to AUD
Power: (guessing) discrete ON for receiver?
2: (guessing) selects input on receiver?
TV: macro assigning keysets to the TV function (again)
shift-5: selecting TV input (BUT THE TV IS OFF!)
shift-power: Finally turns the TV ON!?!
DVD: assigns keysets to DVD
shift-power: turns on the DVD player. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
EZ Ed
Joined: 22 May 2006 Posts: 31
|
Posted: Sat Aug 12, 2006 12:59 pm Post subject: |
|
|
Capn Trips wrote: | Unclear what you mean by "Don't work". Does NOTHING get sent? Or does the LED flash, but nothing seems to work? or do SOME of the macro functions work but not others? Have you tried each individual step in the macro separately? Like assign "TV, x-shift-Power" to a button as a shorter macro and see if IT works, similarly for "AUD, Power, 1" |
The TV portions don't work.
This macro turns everything off and works
Key Shift Exit
TV X-Shift-Power; AUD Shift-Power; DVD XShift-Power; PVR Power
Quote: | On the face of it, it appears that the Amplifier and DVD (or PVR) parts of the macro should work. Do they power up and line up correctly? But the TV functions seem to not make sense the way you sequence them.
Assuming your notes are correct it appears you're sending signals to the TV while it's OFF. Here is the sequence you are sending in the shift DVD macro:
TV: macro assigning keysets to the TV function
x-shift Power: keymove DISCRETE OFF!?!(WHY?)
AUD: macro assigning keysets to AUD
Power: (guessing) discrete ON for receiver? |
The TV has to be off when the macro is executed so the first command makes sure it's off. The TV is connected to the HDMI out of a video switch. The inputs to the switch are the DVD & PVR.
Key Shift DVD
TV X-Shift-Power; -makes sure TV's off
AUD Power 2; -turn Amp on select input for DVD
TV Shift-5 Shift-Power 1; -shift-5 select hdmi switch input 5 then turn TV on
DVD Shift-Power -turn DVD on
Quote: |
2: (guessing) selects input on receiver?
TV: macro assigning keysets to the TV function (again)
shift-5: selecting TV input (BUT THE TV IS OFF!)
shift-power: Finally turns the TV ON!?!
DVD: assigns keysets to DVD
shift-power: turns on the DVD player. |
TV shift-5 is a kemove from the hdmi switch device (dev8) selects input 5 on switch. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Sat Aug 12, 2006 4:21 pm Post subject: |
|
|
Capn Trips wrote: | Have you tried each individual step in the macro separately? Like assign "TV, x-shift-Power" to a button as a shorter macro and see if IT works, similarly for "AUD, Power, 1" |
_________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
EZ Ed
Joined: 22 May 2006 Posts: 31
|
Posted: Sun Aug 13, 2006 7:39 pm Post subject: |
|
|
After further testing it is only the last 2 commands that don't work. DVD Shift-power or PVR Power. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Mon Aug 14, 2006 2:45 am Post subject: |
|
|
I again ask the question (for the third time), does the sequence in question work as a standalone shorter macro?
I'm not sure what could be causing the misbehaviour, but I might suggest that within macros, when you are simply trying to get a single command (or short sequence) to a particular component, there is no need to use your device selection macros (unless you truly want to re-assign your keysets every time). Such temporary device selection within a macro can be accomplished using the X_DEV command.
i.e in your shift-DVD macro:
TV X-Shift-Power; AUD Power 2; TV Shift-5 Shift-Power 1; DVD Shift-Power;
you could re-write it as:
X_TV X-Shift-Power; X_AUD Power 2; X_TV Shift-5 Shift-Power 1; DVD Shift-Power;
to achieve the same net effect, with less macro processing (and attendant delays) by the remote. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
EZ Ed
Joined: 22 May 2006 Posts: 31
|
Posted: Mon Aug 14, 2006 11:49 am Post subject: |
|
|
Capn Trips wrote: | I again ask the question (for the third time), does the sequence in question work as a standalone shorter macro?
|
Sorry Capn, Yes I have tried and yes they work.
Quote: |
I'm not sure what could be causing the misbehaviour, but I might suggest that within macros, when you are simply trying to get a single command (or short sequence) to a particular component, there is no need to use your device selection macros (unless you truly want to re-assign your keysets every time). Such temporary device selection within a macro can be accomplished using the X_DEV command.
i.e in your shift-DVD macro:
TV X-Shift-Power; AUD Power 2; TV Shift-5 Shift-Power 1; DVD Shift-Power;
you could re-write it as:
X_TV X-Shift-Power; X_AUD Power 2; X_TV Shift-5 Shift-Power 1; DVD Shift-Power;
to achieve the same net effect, with less macro processing (and attendant delays) by the remote. |
I'm new to the Extender and macro coding and don't fully understand it. I have changed my macros to using temporary devices like the above example. It's the last command DVD Shift-Power doesn't seem to execute. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
EZ Ed
Joined: 22 May 2006 Posts: 31
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Mon Aug 14, 2006 12:35 pm Post subject: |
|
|
I give up.
Last thing to try, although I believe it should be functionaly the same, is to replace:
DVD Shift-Power
with:
X-DVD, shift-Power, DVD
and replace:
PVR Power
with:
X-PVR, Power, PVR.
Besides that, for efficiency, I would remove ALL V_AUDs from all of your macros, since you NEVER EVER assign V_ to anything else, your VPT setting on the General tab should suffice to keep it assigned to the AUD device. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
EZ Ed
Joined: 22 May 2006 Posts: 31
|
Posted: Mon Aug 14, 2006 12:50 pm Post subject: |
|
|
Thanks Capn I'll try those changes. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|