JP1 Remotes

1. Device: Toshiba HDD-J35
2. Type of device: Set Top Box with Personal Video Recorder (hard drive)
3. Year: 2005
4. JP1 Remote model: OFR Cinema 6+
5. JP1 user? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question?

I know this is a long shot, but I thought that somebody might have stumbled across a code that at least partially works.

Is this PVR a Tivo? If so and if it uses the same codes as the Tivo/DVD combo unit, you should be able to use DVD/0503 to work the main functions, and then you could use advanced codes to fill in the blanks.

Here's the JP1 upgrade from the file section...
http://www.hifi-remote.com/forums/dload ... ile_id=795

Is the model number for your Cinema 6 URC-6800? If so, this is the JP1 compatible version of the Cinema 6, so you could consider using JP1 to program it.

No this isn't a tivo, its probably a DVDR with a harddrive.

I was hoping you'd jump in Edmund, do you happen to know what code this device uses?

I can only guess and say its Dvd 1988.

In the 15-2142 that's a Tivo code, but in all other remotes it's a variation on the regular Toshiba DVD code, which uses the NEC1 protocol with a main device code of 69 and a sub-device code of 188.

Needless to say, this code is much too recent to be present in the old Cinema 6, which was made around 1999.

The Robman wrote:Is this PVR a Tivo? If so and if it uses the same codes as the Tivo/DVD combo unit, you should be able to use DVD/0503 to work the main functions, and then you could use advanced codes to fill in the blanks.

Thanks...no joy on 0503, and 1988 doesn't even exist in my remote. I am checking out the JP1 option.