JP1 Remotes

I seach for DVD Electrohome code for URC8811...

Does any can help me ?

Thanks

Too many questions. Please read the number 1 Code Search FAQ (linked in my signature below) and provide the requested info. and someone will be happy to help.

1. Device: Electrohome
2. Type of device: DVD Player
3. Year: 2005
4. JP1 Remote model: URC8811
5. JP1 user? YES
6. Still have original remote? YES
7. Checked the file section? YES
8. Checked Pronto file section (at R/C)? YES
9. Partially working setup code? NO
10. Learning remote question? Not sure

Marineau wrote:4. JP1 Remote model:
URC8811

10. Learning remote question?
Not sure

The 8811 is a very capable learning remote. Try capturing some or all of the OEM remote signals and use IR to see the decode details needed to build an upgrade.

OK, I just learn a POWER buttons from my original remote to L1 button
I run IR.EXE
I verified in TAB Learned Signal, and read this:
Protocol= NEC1
Device = 0
OBC = 11
EFC = 059

I run Excell for keymap-master-v8.38.xls
I wrote info in TAB Setup.
I edited in TAB functions, to line power, and wrote 059 to column EFC.
I did a COPY in Paste from a TAB setup these char:
Upgrade Code 0 = 17 D6 (DVD/2006) keymap-master Device Upgrade (KM v8.38)
5A 00 11 00 FF FF 2F
End
- I add a new device (2006) in IR program,
- defined DVD to 2006
- Upload to remote
Now, my power button work fine !

My questions are:
Does i'm obligate to repeat a learn these steps for each button ?
Does exist a method to guess a next buttons ?


Thanks

You don't have to repeat all those steps as you can learn all the buttons at once (at least, as many as possible until the memory is full). Plus, you don't need to use the "learning" buttons, you can learn to almost any button.

In other words...
1) Press and hold SETUP, 2 flashes
2) Type 975, 2 flashes
3) Press a button on the URC-8811
4) Press and hold the corresponding button on the OEM remote.
5) Repeat steps 3 and 4 until all the buttons are captured.