JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

JP1 ready learning remote

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
utmba95



Joined: 15 Nov 2003
Posts: 37
Location: Austin, TX

PostPosted: Wed Jun 23, 2010 11:15 am    Post subject: JP1 ready learning remote Reply with quote

Hi,

My URC-6800B bit the dust, and I'm having trouble figuring out what currently available remotes are JP1-ready (with connector), learning and cheap. I just need something to learn commands when I get new equipment. Can you give me some suggestions?

Thanks.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18907
Location: Chicago, IL

PostPosted: Wed Jun 23, 2010 12:02 pm    Post subject: Reply with quote

Any JP1 remotes that are currently available will require a different JP1 cable than the one that you have been using with your URC-6800 remote. So, you're either looking at buying a new cable *and* remote, or if you want to keep your old cable, you'll need to check ebay to see which older remotes are still available.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
pH7_jp1



Joined: 14 Sep 2003
Posts: 461
Location: Sterling Heights, MI

PostPosted: Wed Jun 23, 2010 12:06 pm    Post subject: Reply with quote

Although there is no picture, MCM lists this: http://www.mcmelectronics.com/product/DISTRIBUTED-BY-MCM-/32-26460

The discription only says: UNIVERSAL REMOTE NS-RC01G-09 BLACK, INSIGNIA AND DYNEX TVS and nothing else. The price is good at $13.95.

Here is the thread here describing this remote: http://www.hifi-remote.com/forums/viewtopic.php?t=11728&start=0&postdays=0&postorder=asc&highlight=

This is JP1.3, so as Rob said, it need a different cable.
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 3970

PostPosted: Wed Jun 23, 2010 12:08 pm    Post subject: Reply with quote

The remote chart will tell you what's JP1 and learning. The URC-8910 is a good JP1 learner that's $20 shipped on ebay.
Back to top
View user's profile Send private message
utmba95



Joined: 15 Nov 2003
Posts: 37
Location: Austin, TX

PostPosted: Wed Jun 23, 2010 12:44 pm    Post subject: Reply with quote

Thanks guys. I just now stumbled upon the remote chart. That was exactly what I needed. Now I have to decide whether to get an IR widget or a new remote and cable! $50-70 is a lot to invest for my $20 remotes. Smile

Actually I have a URC-9800 that I've read can be hacked to access the EEPROM that stores the learning codes, but the links to the instructions are all dead. If anybody could point me to that doc, it might be a good stop gap until I decide what to do next.

Thanks.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central