| View previous topic :: View next topic |
| Author |
Message |
krisdz
Joined: 07 Feb 2006
Posts: 38
|
 Posted: Sun Feb 19, 2006 12:35 pm Post subject: Panasonic PT AE900 device upgrade file |
 |
|
Hi
I’m working on the device upgrade file for the Panasonic PT-AE900.
I learn the signals form the Panasonic remote to URC8910.
In KM I create upgrade file as per:
http://www.hifi-remote.com/jp1/help/
Then uploaded it to my Outlaw 990 remote and guess what it is not working.
The protocol used in KM is Panasonic2 (LCD)
The protocol reported in URC8910 was Panasonic2
I’m not sure that those two are the same.
Here is my device upgrade file:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=2817
Any help will be appreciated
Regards
Kris |
|
| Back to top |
|
 |
underquark
Expert
Joined: 20 Jun 2005
Posts: 874
Location: UK
|
| Posted: Sun Feb 19, 2006 3:16 pm Post subject: |
|
|
| There could be a number of reasons for this not working. It would be helpful if you could also upload your IR files - the first one with the learned signals and then the one after you installed the upgrade but couldn't get it to work. |
|
| Back to top |
|
|
ElizabethD
Advanced Member
Joined: 09 Feb 2004
Posts: 2348
|
| Posted: Sun Feb 19, 2006 3:47 pm Post subject: |
|
|
Couple ideas
You used some beta version of KM, is that OK?
The KM upgrade is for Outlaw, not 8910 - did you change the remote brand? Edited: I gather it should be Outlaw, right?
If one Panasonic2 protocol doesn't work, try the other - ther ought to be two possibilities in both RM and KM
[Panasonic2 (LCD-Hacked)]
[Panasonic2 (LCD-Official)]
_________________
Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride  |
|
| Back to top |
|
|
krisdz
Joined: 07 Feb 2006
Posts: 38
|
| Posted: Sun Feb 19, 2006 5:22 pm Post subject: |
|
|
Hi Liz
The beta is OK I used it for the OPPO upgrade and it works.
I changed the remote to Outlaw. It is protocol isuee.
Regards
Kris |
|
| Back to top |
|
|
krisdz
Joined: 07 Feb 2006
Posts: 38
|
|
| Back to top |
|
|
ElizabethD
Advanced Member
Joined: 09 Feb 2004
Posts: 2348
|
| Posted: Sun Feb 19, 2006 9:06 pm Post subject: |
|
|
You never said really what's not working 
The Outlaw IR file indicates upgrade type is TV. But KM upgrade is SAT. I suspect this would cause problems. Also, but this may be my problem, when I open the Outlaw IR file, IR is objecting that the RDF might have an incorrect learned address except I don't think this file is meant to have learned signals.
Protocol used is 109, Panasonic2 official. Likely OK - but I know too little about protocols to meddle in this one. This needs EXPERTS.
The 8910 IR file containing learned signals: The few learned functions match a projector I once looked at (PT-L6500U), except for the Enter key, assuming that Enter was learned on the Enter button.
Edited: I just saw your thread where Greg and Whompus were making you a new RDF for RM, so ignore my above note about the RDF as I'm using an older set.
_________________
Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride |
|
| Back to top |
|
|
krisdz
Joined: 07 Feb 2006
Posts: 38
|
| Posted: Sun Feb 19, 2006 10:30 pm Post subject: |
|
|
Hi Liz,
Nothing is working; I mean there is no response from Projector to any IR signal sent from Outlaw remote.
All other component responds to Outlaw remote. Cable box, DVD, CD, preamp. Etc.
Regards
Kris |
|
| Back to top |
|
|
ElizabethD
Advanced Member
Joined: 09 Feb 2004
Posts: 2348
|
| Posted: Mon Feb 20, 2006 9:30 am Post subject: |
|
|
I still think it's device type mismatch. Did you try changing it?
_________________
Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride |
|
| Back to top |
|
|
whompus
Joined: 27 Apr 2005
Posts: 540
|
| Posted: Mon Feb 20, 2006 11:02 am Post subject: |
|
|
| Upload the ir file from the 8910 that has the learned signals in it and put a link to it here. |
|
| Back to top |
|
|
ElizabethD
Advanced Member
Joined: 09 Feb 2004
Posts: 2348
|
| Posted: Mon Feb 20, 2006 11:05 am Post subject: |
|
|
Whompus, he did - see his post Sun Feb 19, 2006 4:38 pm
_________________
Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride |
|
| Back to top |
|
|
whompus
Joined: 27 Apr 2005
Posts: 540
|
| Posted: Mon Feb 20, 2006 11:09 am Post subject: |
|
|
| Ahhh. My bad, I overlooked that. |
|
| Back to top |
|
|
krisdz
Joined: 07 Feb 2006
Posts: 38
|
| Posted: Mon Feb 20, 2006 11:19 am Post subject: |
|
|
I try it as TV and OEM. Otherwise what it could be?
Kris |
|
| Back to top |
|
|
whompus
Joined: 27 Apr 2005
Posts: 540
|
| Posted: Mon Feb 20, 2006 11:33 am Post subject: |
|
|
| Does the 8910 operate it with the learned functions? |
|
| Back to top |
|
|
ElizabethD
Advanced Member
Joined: 09 Feb 2004
Posts: 2348
|
| Posted: Mon Feb 20, 2006 4:41 pm Post subject: |
|
|
| krisdz wrote: | I try it as TV and OEM. Otherwise what it could be?
Kris |
IF I'm correct that it's mismatch of type, you could just change type in IR general tab , try it, it's simpler than changing the upgrade.
_________________
Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride |
|
| Back to top |
|
|
Mark Pierson
Expert
Joined: 03 Aug 2003
Posts: 3017
Location: Connecticut, USA
|
| Posted: Mon Feb 20, 2006 5:57 pm Post subject: |
|
|
| krisdz wrote: | | I try it as TV and OEM. |
The upgrade file you posted is set for SAT/0392. The Outlaw IR file you posted contains a CBL/SAT/0392 on the Devices tab, but the CBL button is set to TV/0392 on the General tab. Try setting the CBL button to CBL/SAT.
_________________
Mark |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
