Page 1 of 3
help puttin RM code in SBAV config file
Posted: Tue Feb 14, 2006 3:09 pm
by b1harlem
alright i have used rm to program my nest level vdsl box
got file from file section for my device
used rm to program file
exported to sbav file
saved to sbav file
put code in config file sbav
code from rm s2000
however not working
i think i screwd up something can you guys help me
thanks
Posted: Tue Feb 14, 2006 3:54 pm
by Capn Trips
Typical errors:
(1) Using PL instead of JU or vice versa;
(2) Not saving the BIN file in the correct folder;
(3) Not modifyiyng the sbav.cfg file properly.
(4) Not using grammar, punctuation or complete sentences, making difficult to understand a question; 
Upload all of the relevant files (Source file you started from, your modified RM file, your generated BIN file, and your sbav.cfg file), and someone will have a look.
What version Slingbox do you have (and how have you confirmed this)?
What is a "nest level vdsl box"
?
Posted: Tue Feb 14, 2006 4:57 pm
by whompus
If you are talking about the expressVu you may find that a build in code may operate it.
Have you try any of the codes that operate like sat 0775. Such as code for expressVu, hts, or jvc sat codes. With the sling being pretty new it may have version 3 of dish network protocol (which is a combo) in it and it seems that is what expressVu runs.
Posted: Wed Feb 15, 2006 9:59 am
by b1harlem
thanks for the reply i will try to spell better
i checked my sling box and my serial number idicated that I have a
pl box (serial number starts with 508)
the ir blaster in the info section of the player said it was blaster version 2
i have the "beta" firmware 1.0.58
downloaded the rm and found the code for my box in the files section of jp1 "next level rg2200" which is the device i have
I used pl in the rm and the exported the output to the
sbav file and saved it
then opened the sbav config file and inserted the code at this location
runco HT600T=BRAND:RUNCO, NAME:HT 60OT, CODE:c000, Digits:1
[/code]
Posted: Wed Feb 15, 2006 10:37 am
by Capn Trips
Capn Trips wrote:
Upload all of the relevant files (Source file you started from, your modified RM file, your generated BIN file, and your sbav.cfg file), and someone will have a look.
Posted: Wed Feb 15, 2006 11:51 am
by gfb107
Posted: Wed Feb 15, 2006 1:27 pm
by b1harlem
need insrtuctions for upload
i am a newbie i did follow your detailed thread to coolsat
thanks for the reply [/code]
Posted: Thu Feb 16, 2006 3:51 am
by Capn Trips
b1harlem wrote:need insrtuctions for upload
Look at the top of this page, there are a bunch of navigation icons. Go to the "File Section". Once there, go to the "Diagnosis area". Once there, there is an "upload" button at the top of the page. Click it and it walks you through uploading a file.
THEN post links to your uploaded files back here, so we can find them. (those instructions appear when you are composing a post, when you scroll the cursor over the
URL tag above the text panel.)
help putting files in sbav
Posted: Fri Feb 17, 2006 9:01 am
by b1harlem
Posted: Fri Feb 17, 2006 10:07 am
by whompus
It looks like you have found a file where rm has trouble exporting to bin from maunal settings.
Posted: Fri Feb 17, 2006 10:16 am
by b1harlem
dont know how i did that can i retry without manual settings?
Posted: Fri Feb 17, 2006 10:20 am
by whompus
You didnt do it. Manual settings is what the upgrade file is from the original txt file you started with.
Do you happen to have an ofa remote to test a thought with?
It dont need to be jp1.
Posted: Fri Feb 17, 2006 10:34 am
by b1harlem
i dont have a ofa remote(is that a learning guy?) excuse my ignorance
does this mean that the file is missing something maybe???
Posted: Fri Feb 17, 2006 10:52 am
by b1harlem
this is a thread where a guy have the same device and apparently uploaded the codes and someone helped him...maybe this will help:
http://www.hifi-remote.com/forums/viewtopic.php?t=2777
Posted: Fri Feb 17, 2006 11:57 am
by gfb107
Why do you think there's something wrong with the bin file RM exported?
I think the problem is more likely to lie here:
the ir blaster in the info section of the player said it was blaster version 2
i have the "beta" firmware 1.0.58
downloaded the rm and found the code for my box in the files section of jp1 "next level rg2200" which is the device i have
I used pl in the rm ...
Is the blaster version 2.0 or 2.1?
If it is 2.0 (which I think it is), you should be using JU.
If it is 2.1 you should be using PL.
Also, did you read this
post I suggested? It says
The Robman wrote:UPDATE: According to
this post, there is a problem with the beta Slingbox software with regards to creating your own upgrades. So if you are having problems and you are using the beta software, that's probably what the problem is.