Error message when downloading from remote

sesl · Post by **sesl** » Mon Jan 23, 2006 10:06 pm

When ever i try to download from my remote (urc-9960B01) i get this mesage
"The learned command referencesan internal bust table, but the index is out of bounds. This could be caused by an incorrect LearnedAddr in the RDF."
i dont know if im doing someting wrong or if it is something i did wrong in IR?
please help

johnsfine · Post by **johnsfine** » Tue Jan 24, 2006 7:26 am

Maybe one of the other experts knows something more specific. If not then we would need to see the .ir file in order to diagnose it.

Despite the error message, you can save from IR.exe to create a .ir file, and you can upload that to our diagnosis area and post its URL back here.

We'll know more after we see it. But some possibilities are:

Obsolete IR.EXE or RDF files. Are you sure you have the most recent?

Some error in the understanding of 9960's by the authors of IR.EXE and/or the RDF files (in which case you can't fix it but your .ir file may help in understanding it).

The learned signals portion of your 9960's eeprom really is trashed, in which case it may be hard to salvage your learned signals, and you'll need a full reset of the 9960 and/or clean download from IR.exe to get the 9960 healthy again.

sesl · Post by **sesl** » Tue Jan 24, 2006 8:13 pm

well i know i have the latest IR.exe (6.15) and rdf's (1.20) unless they are older versions and i have made the ir file and its at http://www.hifi-remote.com/forums/dload ... le_id=2727
and i have tryed the full reset several times and gave up doing that because i dont want to learn all me keys again.

whompus · Post by **whompus** » Tue Jan 24, 2006 8:41 pm

If you are sure you have the b01 version of the remote then you are using the wrong rdf for it. The rdf you are using is for the bj5 version. The b01 version is kasakaso the bj5 is sakaso.

The newest rdf files are 1.25 you can get them here in tools main area.

sesl · Post by **sesl** » Tue Jan 24, 2006 9:27 pm

thanks for that but now i get a different error it says that a definiton file couldnt be found and cant interpret the data and i dont know what to do anymore

now i get a message that says
No data Found in signature this indicates that the interface isnt working properly

whompus · Post by **whompus** » Tue Jan 24, 2006 11:01 pm

Your most likely going to have to do a full mfg reset on the remote and then use the right rdf to start over.

sesl · Post by **sesl** » Wed Jan 25, 2006 12:14 am

thanks ill try it when i get home from school tomorrow

johnsfine · Post by **johnsfine** » Wed Jan 25, 2006 6:45 am

sesl wrote:well i know i have the latest IR.exe (6.15) and rdf's (1.20) unless they are older versions and i have made the ir file and its at http://www.hifi-remote.com/forums/dload ... le_id=2727

The data looks like it was read wrong from the eeprom. I think everything is shifted by two bytes.

I think I remember a case long ago when someone else had that problem, but I don't remember the cause or the solution.

?? Maybe transmission delay ??

sesl · Post by **sesl** » Tue Jan 31, 2006 12:38 am

srry i havent replyed in awhile but have been busy
i have noticed that after i first rest my remote and connect it
it is perfectly fine
but after i try to learn a key and try to download it starts doing it all over again