JP1 Remotes

[friendlyfire]

Hi, I think this is pretty basic but I could use a prod in the right direction,

I have raw learned data learned from the FAV key for the remote controling my DCT2244. Since I know what protocol is used it shouldn't be to hard to get the EFC, right?

To help with the quest, I learned another button that I know the EFC for already (in this case channel up, EFC 140). I plugged this EFC in the calculator in IR expecting to find some data in the learned sequence matching one of the result fields, but I don't.

FAV key raw data (EFC= ?)

+9044 -2290 +500 -89082 +9044 -2290 +500 -130570 +9044 -2290 +500 -89082 +9044 -2290 +500 -89082 +9044 -2290 +500 -130570

channel up (EFC = 140)
+9044 -4532 +500 -4528 +500 -4528 +500 -2264 +500 -4528 +500 -2264 +500 -2264 +500 -2264 +500 -2264 +500 -2264 +500 -2264 +500 -2264 +500 -2264 +500 -4528 +500 -2264 +500 -4528 +500 -2264 +500 -31286 +9044 -2290 +500 -89082 +9044 -2290 +500 -89082 +9044 -2290 +500 -89082 +9044 -2290 +500 -130570

protocol GI CABLE. Device Setip 1453

can someone please explain the procedure I should follow to get the EFC for the first set of raw data?

if this is documented then a quick pointer to the right reference material is all I need,
thanks
Brian

[The Robman]

Just FYI, whenever you want someone to decode a learned signal for you, you should always post the IR file rather than just the timing data.

However, in this case, I would have expected IR to be able to decode the info for you. So, either you didn't see the decode or you haven't downloaded the DecodeIR.dll program yet.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

[whompus]

If your quest is to learn how to decode raw I can be of no help.

If you just want the efc it is 079.

[friendlyfire]

thanks guys, I see that IR displays the EFC
stooooopid...