NEC 2 (2 Device) Same EFCs in diferent function bottons

elarrosito · Post by **elarrosito** » Sun Sep 25, 2005 10:03 pm

Hi all!

I'm trying to create a code for a CCTV scurity cameras DVR Webgate. I learned few botons and the protocol is NEC 2 (2 Device) but I found Same EFCs in 2 diferent function botons but the "sent once when key is pressed is different. How can I create a code for this device?

I appreciate any help

Capn Trips · Post by **Capn Trips** » Mon Sep 26, 2005 1:55 am

First,

PLEASE USE THE MANDATORY TEMPLATE!

Second,

It's simplest to post the IR file with your learned signals to the diagnosis area (see the "File Section" link at the top of the page) with (1) a detailed explanation of what is learned to which key, and (2) a link to your file.

Post by **The Robman** » Mon Sep 26, 2005 6:11 am

Also, make sure that you have the latest versions of all the software, including DecodeIR. The fact that the protocol is listed as "NEC2 (2 device)" tells me that you're using out of date software.

johnsfine · Post by **johnsfine** » Mon Sep 26, 2005 6:17 am

elarrosito wrote:protocol is NEC 2 (2 Device)

That sounds like it came from an older version of the decoder, maybe the one built-in to IR.EXE.

IR.EXE should use DecodeIr.dll for decoding, not the old built-in decoder. Make sure you have a recent copy of DecodeIr.dll
http://john.fine.home.comcast.net/ir/Decode_IR_DLL.zip
and that it is in a directory where ir.exe can find it.

(This is in addition to, not instead of, following the advice Capn Trips gave).

JP1 Remotes

NEC 2 (2 Device) Same EFCs in diferent function bottons

NEC 2 (2 Device) Same EFCs in diferent function bottons

Re: NEC 2 (2 Device) Same EFCs in diferent function bottons