JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in
File SectionFile Section File SearchFile Search Lookup ToolLookup Tool WikiWiki

trying to add new protocol, need help deciphering

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
thereza



Joined: 11 Jul 2005
Posts: 1

                    
PostPosted: Mon Jul 11, 2005 3:49 am    Post subject: trying to add new protocol, need help deciphering Reply with quote
So I used my learning remote to grab commands from my remote (3rd party xbox remote), but ir.exe didn't recognize it. It's at 37558khz, and it seems to consist of either +/-500 or +/-1500 length pulses (not sure the units that ir.exe provides). I went ahead and converted a few commands to more legible strings with +500=H +1500=HHH -500=L and -1500=LLL
This is what i got for a few commands :

Code:
FWd : HLHHHLHL LLHHHLHL LLHLLLHL LLHHHLHL LLHLLLHL LLHHHLHH HLHLLLH
reW : HLHHHLHL LLHHHLHL LLHLLLHL LLHHHLHL LLHLLLHL LLHLLLHH HLHHHLH
LEFT: HLHHHLHL LLHHHLHL LLHLLLHL LLHLLLHH HLHLLLHL LLHHHLHH HLHLLLH
RIGH: HLHHHLHL LLHHHLHL LLHLLLHL LLHLLLHH HLHLLLHH HLHLLLHH HLHLLLH

These strings are repeated 2x, with a low of 10000 duration after each string. I'm playing with the protocol making xls file, and it wants to know what a 1 is and what a 0 is. I was hoping that someone's got a good idea what these correspond to. As there are no 1000 length pulses, I don't think it's a straight H=1 and L=1. Any ideas?

thnx,
reza

p.s. sample output from ir.exe for RIGHT command :

Quote:
+504 -528 +1436 -526 +504 -1546 +1436 -526 +504 -1546 +504 -1546 +504 -1546 +504 -1546 +1436 -526 +504 -1546 +1436 -526 +504 -1546 +1436 -526 +504 -1546 +504 -10970 +504 -528 +1436 -526 +504 -1546 +1436 -526 +504 -1546 +504 -1546 +504 -1546 +504 -1546 +1436 -526 +504 -1546 +1436 -526 +504 -1546 +1436 -526 +504 -1546 +504 -10970
Back to top
View user's profile Send private message
johnsfine
Site Admin


Joined: 10 Aug 2003
Posts: 4766
Location: Bedford, MA
                    
PostPosted: Mon Jul 11, 2005 8:06 am    Post subject: Reply with quote
That protocol is mentioned here http://john.fine.home.comcast.net/ir/DecodeIr.html#GXB in my documentation for DecodeIr.dll

Do you have a recent copy of DecodeIr?
http://john.fine.home.comcast.net/ir/Decode_IR_DLL.zip

If you do and it doesn't decode those signals, I'd like a copy of the .ir file with those signals, so I can fix DecodeIr. You can email that to me or post it in the diagnosis area.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control