JP1 Remotes

migmog · Joined: 24 Jun 2005 Posts: 3

Hi - I've spent a few hours with a JP1 cable trying to get my dec-2000t remote going, here's the issue...

It's RC-5, but the original remote appears to be alternating between codes (T=0/T=1) every time you press a button. I can't seem to get the OFA remote to do this.

Any ideas?

thanks
Andrew

1. Device: Hauppauge DEC 2000-t
2. Type of device: DVB (Freeview) STB
3. JP1 Remote model: URC-7550
4. JP1 user? Yes
5. Still have original remote? Yes
6. Checked the file section? Yes
7. Checked Pronto file section (at R/C)? No
8. Partially working setup code? Yes
9. Learning remote question? Yes

gfb107 · Expert Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC

What is the partially working setup code you are using?
How are you trying to control the device? Are you using the learned signals, building a device upgrade, or using keymoves?

Post your IR file and device upgrades in the diagnosis area and someone can take a look.
_________________
-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)

migmog · Joined: 24 Jun 2005 Posts: 3

> What is the partially working setup code you are using?

I went to Yahoo, and found SAT-1294 for Hauppauge, which did absolutely nothing right. I've overridden all the buttons with learned signals.

> How are you trying to control the device? Are you using the learned signals, building a device upgrade, or using keymoves?

Learned signals.

> Post your IR file and device upgrades in the diagnosis area and someone can take a look.

I'll try to do this. - I take it there's not a simple way to get the remote to use the toggle bit? I'm assuming that's all that I need to get it to do.[/quote]

gfb107 · Expert Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC

Learned signals can't be used to control devices that use toggle bits. A device upgrade could do it.

WHen you say

migmog · Joined: 24 Jun 2005 Posts: 3

Thanks for the pointers, I got it working by creating an upgrade.

Andrew

The Robman · Posted: Sat Jun 25, 2005 9:01 pm Post subject:

If your upgrade is different to the one in the file section, be sure to load your version into the file section so others can use it.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!