JP1 Remotes

I have a Hitachi Ultravision 60V710 that I have programmed to RS 2117
The input selection on this TV is a bit of a pain. When TV/VCR button is pushed a screen pops up with scrolling options to the input that is wanted and then either the select button is pressed or the right arrow button. then the exit button must be pressed to get that menu off the screen. I was thinking of doing a macro or keymove to change the input with the device but am a bit confused as to how to do it.
Thanks in advance for the help

Even though they aren't on the original remote, there discrete input codes that you can use for this TV without requiring a macro.

This thread on RemoteCentral explains how to access them from the original Hitachi remote (so you can learn them) and also gives the OBC's and EFC's for them as well.

http://www.remotecentral.com/cgi-bin/mb ... ht=hitachi

Let me know if you have problems.

David

Thanks so much for the info I also did some more searching and found a complete hitachi upgrade with the discrete video codes. Works great but that post sure has every last discrete available for Hitachi RPTV

Thanks,
Nick

Hi!

Would you have the kindness to post the more complete discrete codes for the Hitachi Ultravision you were talking about? I own the Ultravision 42v515 myself.

Thanks!


Beb

Maybe this one http://www.hifi-remote.com/forums/dload ... ile_id=908?