View previous topic :: View next topic |
Author |
Message |
ElizabethD Advanced Member
Joined: 09 Feb 2004 Posts: 2348
|
Posted: Mon Mar 14, 2005 10:03 pm Post subject: Need device to deal with memory full learning problem |
|
|
Has anyone invented a contraption to connect jp1 cable to USB flash memory stick so that in the absense of a laptop+IR, learned eeprom memory could be pushed to the stick into some goofy-named files
I just gathered codes from two devices which required four downloads to IR due to mem full problem. I'm serious. Remotes these days have 60+ buttons. It just doesn't all fit in one shot.
BTW, I know it's impossible , but I've seen impossible things overcome in the jp1 world, so I thought I should ask. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Tue Mar 15, 2005 10:05 am Post subject: |
|
|
I thought about this problem a while back and my proposed solution was for someone to write a learning-only extender for a URC-8811 that has been modified to have 8k of memory (or maybe even more). The idea never got off the ground though.
I expect that John is too busy to write such an extender, but it might be a good project for some other budding extender writer. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Tue Mar 15, 2005 10:18 am Post subject: Re: Need device to deal with memory full learning problem |
|
|
ElizabethD wrote: | a contraption to connect jp1 cable to USB flash memory stick | The problem with USB is that you require a Master device (i.e. PC) to drive the Slave device (i.e. flash stick) so there isn't any real option for what you envision. _________________ Mark |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Tue Mar 15, 2005 10:22 am Post subject: |
|
|
The Robman wrote: | I expect that John is too busy to write such an extender, but it might be a good project for some other budding extender writer. |
I got part way through that project long ago before giving up (leaving nothing in an understandable enough form that even I could pick it up again). It was harder than I thought.
When/If I have more time to look at bulk IR capture topics, I'd rather focus on improving the DecodeIr connection of some direct_to_the_printer_port capture method. |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Tue Mar 15, 2005 12:32 pm Post subject: |
|
|
johnsfine wrote: | I'd rather focus on improving the DecodeIr connection of some direct_to_the_printer_port capture method. | Except in this case I think everyone is talking about an option for when the PC isn't available, like those trips to the local Circuit City with your trusty JP1 remote in tow. _________________ Mark |
|
Back to top |
|
|
mr_d_p_gumby Expert
Joined: 03 Aug 2003 Posts: 1370 Location: Newbury Park, CA |
Posted: Tue Mar 15, 2005 3:39 pm Post subject: |
|
|
Mark Pierson wrote: | Except in this case I think everyone is talking about an option for when the PC isn't available, like those trips to the local Circuit City with your trusty JP1 remote in tow. | How about modifying a remote so that you can plug in the EEPROM. That way, you could take several EEPROMs along with you to CC. 8) _________________ Mike England |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Tue Mar 15, 2005 4:19 pm Post subject: |
|
|
mr_d_p_gumby wrote: | How about modifying a remote so that you can plug in the EEPROM. That way, you could take several EEPROMs along with you to CC. |
Better yet, just take a battery powered soldering iron along with you and use it to mount the new EEPROM chips! _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
ElizabethD Advanced Member
Joined: 09 Feb 2004 Posts: 2348
|
Posted: Tue Mar 15, 2005 9:59 pm Post subject: |
|
|
Mark Pierson wrote: | The problem with USB is that you require a Master device (i.e. PC) to drive the Slave device (i.e. flash stick) |
OK. How about those memory cards people use in digital cameras? Could we piggy-back onto whatever drives that from the camera end? My laptop has a card reader. I've never used it and have no idea what's involved, but maybe ???
The Robman wrote: | ... write a learning-only extender for a URC-8811 that has been modified to have 8k of memory ... |
I like that one.
Bottom line looks like someone has to invent more time for John Fine
johnsfine wrote: | I'd rather focus on improving the DecodeIr connection of some direct_to_the_printer_port capture method |
John, better than nothing, but my idea, and it looks like Mark is on the same page, is to be independent of computer during learning. In Circuit City stealing codes, relatives' house, or someplace. Just a remote and couple batteries in your pocket. Inconspicuous if possible.
Mike's idea of plugging something into a remote ... that too is cool.
BTW, thanks for taking this seriously, I thought I was completely nuts |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Tue Mar 15, 2005 10:27 pm Post subject: |
|
|
mr_d_p_gumby wrote: | plug in the EEPROM | IIRC, the 6012w had provisions on the PCB for a standard DIP chip, so one could just solder a chip socket in there, hack a hole in the remote, and voila! _________________ Mark |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Tue Mar 15, 2005 10:29 pm Post subject: |
|
|
ElizabethD wrote: | I thought I was completely nuts | Thought??? _________________ Mark |
|
Back to top |
|
|
classicsat
Joined: 20 Feb 2004 Posts: 279
|
Posted: Wed Mar 16, 2005 6:37 pm Post subject: |
|
|
Actually, since the JP1 connector has all the pins of the EEPROM, one could make a number of plug in modules, each with their own eeprom, which plug into the JP1 connector, with the stock eeprom disabled or removed.
Along with the original line, one could have a microcontroller read the JP1 to a file on an external memory device, such as a large EEPROM or CD/CF or whatever can easily be addresed in low level software. |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Wed Mar 16, 2005 7:16 pm Post subject: |
|
|
classicsat wrote: | Actually, since the JP1 connector has all the pins of the EEPROM, one could make a number of plug in modules, each with their own eeprom, which plug into the JP1 connector, with the stock eeprom disabled or removed. | That's a nice idea, but you'd still need a PC or some other stand-alone device to power/drive the JP1 interface. And if you're connecting an EEPROM to the JP1 connector, you can't connect it to a remote which is still the best way to learn IR signals in the JP1 world.
An 8k (or larger) learning-only extended remote still seems to be the best, easiest, and cheapest method of portable IR capture (without the need of a PC). The hardest part of this is convincing John or one of the other extender writers to write the extender. _________________ Mark |
|
Back to top |
|
|
mr_d_p_gumby Expert
Joined: 03 Aug 2003 Posts: 1370 Location: Newbury Park, CA |
Posted: Wed Mar 16, 2005 9:13 pm Post subject: |
|
|
Mark Pierson wrote: | classicsat wrote: | Actually, since the JP1 connector has all the pins of the EEPROM, one could make a number of plug in modules, each with their own eeprom, which plug into the JP1 connector, with the stock eeprom disabled or removed. | That's a nice idea, but you'd still need a PC or some other stand-alone device to power/drive the JP1 interface. And if you're connecting an EEPROM to the JP1 connector, you can't connect it to a remote which is still the best way to learn IR signals in the JP1 world. | Actually, that could work just fine, as power & ground are also on the JP1 connector. And you'd only need to connect to a PC to read back the contents later. For that, you could have a JP1 "Y" connector so you could plug in both the EEPROM module & the PC at the same time. _________________ Mike England |
|
Back to top |
|
|
classicsat
Joined: 20 Feb 2004 Posts: 279
|
Posted: Wed Mar 16, 2005 11:25 pm Post subject: |
|
|
Don't need a y adaptor, just a butt adaptor, a PCB with two 6 pin connectors, one for the EEPROM module, one for the JP1 interface, and a 2 or 4x AA holder (to power the eeprom and interface). |
|
Back to top |
|
|
|