View previous topic :: View next topic |
Author |
Message |
damir
Joined: 01 Oct 2003 Posts: 102 Location: Croatia |
Posted: Tue Feb 08, 2005 6:24 pm Post subject: Protocol builder help |
|
|
I'm trying to create protocol for very simple IR signal with protocol builder,
so far without much success.
pronto hex of IR signal:
0000 0071 0000 0001 0014 008c
I thought this would work, but when I learn it back, this is what I get
Frequency: 0
Sent repeatedly: +20 -396
Upgrade protocol 0 = 00 99 (S3C8) PB v3.10
44 93 01 8B 0E 84 01 00 01 00 0A 00 32 00 0A 00
32 00 00 8D 01 33
End |
|
Back to top |
|
|
jon_armstrong Expert
Joined: 03 Aug 2003 Posts: 1238 Location: R.I.P. 3/25/2005 |
Posted: Wed Feb 09, 2005 9:37 am Post subject: |
|
|
Damir,
I decode the Pronto hex to be a repeating signal of +545,-3817 both in uS.
I disassembled your Protocol and changed to the numbers above for both a One or Zero and here is what I get:
Upgrade protocol 0 = 00 99 (S3C8) PB v3.10
42 95 01 8B 0E 84 01 00 01 01 10 07 60 01 10 07
60 00 00 8D 01 33
End
Also, as I'm sure you know, it's for the older S3C80 remotes.
I didn't test it though. _________________ -Jon |
|
Back to top |
|
|
|