JP1 Remotes

Remote= 8810 + extender
IR file created w/IR5.15
IR = 6.00
Latest RDF's.

I added the LKP protocol to the RDF (01F9 aka TV1106). IR6 shows the LKP in the SP tab, however it is not reading the values correctly.

It does not translate the hex to the keyname in the grid and it also does not let me edit or add a new LKP. When opening the SP dialog and selectng LKP the selection boxes are grayed out.

If this has been addressed before my apologies, I could not find it.

Could you post a copy of your IR file in the new Diagnosis Area.

e34m5 wrote:Remote= 8810 + extender
IR file created w/IR5.15
IR = 6.00
Latest RDF's.

I added the LKP protocol to the RDF (01F9 aka TV1106). IR6 shows the LKP in the SP tab, however it is not reading the values correctly.

It does not translate the hex to the keyname in the grid and it also does not let me edit or add a new LKP. When opening the SP dialog and selectng LKP the selection boxes are grayed out.

If this has been addressed before my apologies, I could not find it.

Paul, Is this what you added to the RDF with the other SP's---- LDKP=01F9

Oops...I forgot the D in LDKP.

However, I think LDKP should be included like all the rest and IR should check against available protocols.

Paul

This is what I got for the last one

LKP on DVD Phantom3
Duration = 4

Short is:
Shift-Power

Long is:
X_TV
Phantom2
X_SAT
Phantom2
X_RCVR
Phantom2
X_DVD
Phantom2

Is this correct?

You beat me to the rsponse