Upgrade code for new Directv R10 DVR and receiver

[mhallerbach]

Does anybody have an upgrade code(Or know of another code) for this new model receiver, which is a series 2 Tivo with the 2 tuner Directv receiver. I tried the Directv D10 upgrade code(which was the closest I could find)previously posted but it did not work.

I am using a 15-1994, current version of ir.exe, and Keymap.

asny thoughts or info is greatly appreciated.
mh

[jon_armstrong]

I'm pretty sure all DirecTiVo's use the TiVo command set here called Philips or Hughes TiVo (but not the Sony TiVo).

[mhallerbach]

I'm pretty sure all DirecTiVo's use the TiVo command set here called Philips or Hughes TiVo (but not the Sony TiVo).

This is the upgrade code I tried, but it wll not work. However, I am not too familiar with working with Protocols in IR so maybe that's my problem. I cut and pasted the protocol data from KM into IR under the "Protocols" tab, using the add command, and it looks correct, as it filled in data into each of the 3 sections of this screen. Do I need to change any other info in any of the other Tabs, such as devices (note: The protocol ID under Devices Tab is not exactly the same, but it won't let me change it(Under Protocol tab its $0162, and in devices its listed as just 162). Am I doing something wrong?

Thanks for your help.

[jon_armstrong]

Sorry, I posted the wrong link. I have corrected it in my earlier post but it is here

This is just the JP1 Yahoo files|devices|PVR. The link I previously posted is not what it uses. It just uses the regular TiVo command set. You can confirm this by learning some commands and creating a device upgrade by starting with one of those with the basic commands.

IR if you are using one of the recent versions, will decode the learned commands for you. You will probably have some additional commands from the previous single tuner models and you can add those to the upgrade. Please post your device upgrade back to the files section when you get it working.

[The Robman]

The D10 does indeed use the standard Tivo codeset. I have compiled a master file that contains all the known EFCs for this code set here: Tivo-master-list.txt.

If you have tried using this upgrade and it didn't work, it means you are doing something wrong. The guide to loading an upgrade is here:

http://www.hifi-remote.com/jp1/help/

For this device you will need to load BOTH a device upgrade AND a protocol upgrade. Furthermore, the 15-1994 contains a bug which will prevent you from using learned signals under the device key where you have this loaded (because of the upgraded protocol).