JP1 Remotes

The latest version of KM (v8.30) is available.

Changes include:

• Fixed 'Device Combiner' bug with 'TiVo (Official)' protocol.

Note:
Bug fix needed...
Remote 15-2107 is missing the "INFO" key and should have "42" keys and not "41" as the current template lists..
When in VCR mode:
Clock/Title/Mode line and then third row down..
Second column from the left.


--David

DavidEC2955 wrote:Remote 15-2107 is missing the "INFO" key

As far as I can tell, the INFO button is being shown as the DISPLAY button in KM. I'll change the label for the next release.

and should have "42" keys and not "41" as the current template lists[

The RDF (and IR) only shows 41 buttons in VCR mode, so I'm not sure whether this is a bug or not.

Mark Pierson wrote:

DavidEC2955 wrote:Remote 15-2107 is missing the "INFO" key

As far as I can tell, the INFO button is being shown as the DISPLAY button in KM. I'll change the label for the next release.

and should have "42" keys and not "41" as the current template lists[

The RDF (and IR) only shows 41 buttons in VCR mode, so I'm not sure whether this is a bug or not.

Thanks...

15-2107 Button count confusion... FOLLOWING IS FROM MY REMOTE IN "VCR" MODE
[Device Display Time]
}:_Then there are five columns by eight rows on the soft touch keypad_:{
EXT, MENU, UP, GUIDE, TV/VCR
ADJ +, LEFT, SELECT, RIGHT, FF
ADJ -, INFO, DOWN, EXIT, REV
SURR, 1, 2, 3, PLAY
REPLAY, 4, 5, 6, STOP
LIVE, 7, 8, 9, PAUSE
LAST, 100+, 0, ENTER, REC
[1] MODE SHIFT, TV, VCR/DVD, CAB/SAT, RECVR
[2[ MODE SHIFT, AUX1, AUX2, AUX3, AUX4
[3] MODE SHIFT, THEATER, SET 1, SET2, SET3
}:_Hard Buttons_:{
Vol +/-
Power
CH +/-
and three macro keys [1M, 2M, 3M]
MUTE, P{ROGRAM}, SCAN/FAV

There is a little typo in the protocol help for the Pioneer DVD protocol. It says:

"If some functions send a signal with NEC2 device code 165, but some of the other functions send a two-part signal where the first part is NEC2, device 165, command 153"

The right device code should be 163.

Uwe