JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Integrating IR and RF from different systems

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> X10 and Home Automation
View previous topic :: View next topic  
Author Message
barnard1727



Joined: 07 Feb 2005
Posts: 1

                    
PostPosted: Mon Feb 07, 2005 8:34 pm    Post subject: Integrating IR and RF from different systems Reply with quote

Does anyone know the technicalities of integrating different RF and IR systems together? This is to offer maximum flexibility of whole house control. Let me explain:

Given an RF powermid receiver, OFA 9910 RF receiver, Channel Plus Channel injector. Each of these three devices has a mini-jack port to connect an IR emitter to control your equipment. The problem is I then have 3 IR emitters and I'd like to match certain ones to each of my several components. So I would love to have them all plug into some kind of IR engine like a Xantech connecting block (e.g., they make a multi-zone block that "appears" to be what I want).

I guess the real question is can you just connect double-ended mini-jack plugs between my three IR emitter ports and combine them together with a connecting block? I can't seem to find anything that references routing these signals from different sources like this through a connecting block - are some 5Volt and other 12Volt, etc. I just don't have a clue about the signal coming out of these mini-ports and the signal the connecting block is expecting.

Greatly appreciated if anyone can offer any insight on this one.

Thanks.
Back to top
View user's profile Send private message Send e-mail
MaskedMan
Tivo Expert


Joined: 10 Feb 2004
Posts: 1006
Location: Boone, IA

                    
PostPosted: Tue Feb 08, 2005 6:12 pm    Post subject: Reply with quote

Replace the 9910 with either URC urc-100, 200, 300 or HTM mx-350, 600, each will communicate directly with your pyramid rf extender.
_________________
Edmund
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> X10 and Home Automation All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control