JP1 Remotes

I contacted support and they send me advanced codes to turn on PIP
using the 9910 remote - it stil doesn't work ...
( If I turn PIP on using the original remote the jog dial on 9910 works fine to resize an so on)

Here is what I got from support: ( tried 732 - no go, 377 will turn it off but not on)

TVs ------------------ <TV Group>
0000 400 * 606 BS Mono/Ster 515 Picture Mode 675 Sub Ch Volum
Dn 463 -/-- 417 Cable 466 Picture Up 412 Sub Ch Volum
Up 463 10 S Wait 313 Channel Inde 443 PIP Audio 279 Subtitle 16x
400 11 723 Channel Lock 478 PIP Channel 622 Surround
403 13 397 Clear 571 PIP Channel 621 System Off
655 14 460 Color Down 695 PIP Channel 369 System On
397 16 720 Color Up 738 PIP Channel 306 Time
377 A/V Off 540 Computer 483 PIP Freeze 306 Timer
450 Add 483 Digital Memo 377 PIP Off 557 Timer 2
444 AFT On 543 Digital RGB 308 PIP Replay 435 Timer-Off
348 Alarm 545 Digital RGB 565 PIP Split 370 Tone
540 Analog RGB 1 291 Digital RGB 480 PIP TV/Video 318 Treble Down
364 Antenna SW R 560 Down 621 Power Off 578 Treble Up
624 Antenna/Aux 702 Erase 369 Power On 447 Trinitone
515 ASC 627 External A 605 Rear Volume 369 TV
512 Audio 317 Fine Down 353 Rear Volume 243 TV
333 Audio Monito 577 Fine Up 435 Repeat 558 Up
627 Audio Select 735 Flash Motion 593 Reset 663 Velocity Sca
636 Auto Program 670 FM 367 RGB 510 Video
257 AV Out 423 Format 415 S-Composite 369 Video 1
497 Balance Left 498 Hue Down 420 Screen Norm/ 546 Video 1
237 Balance Righ 238 Hue Up 294 Screen Norma 286 Video 2
370 Bass 546 Line A 536 Scrn Wide Zo 288 Video 3
572 Bass Down 286 Line B 381 Seek Down 285 Video 4
320 Bass Up 568 Memo Display 641 Seek Up 418 Video 5
333 Bilingual 333 MPX Main/Sub 707 Select 670 Video 6
306 Blk 333 MTS 492 Sharpness Do 243 Video Reset
717 Bright Down 453 Music 240 Sharpness Up 288 VTR
465 Bright Up 701 Nicam 509 Shift 296 Zoom/Subtitl
397 BS 11 333 Nicam 354 Speakers On/Off
403 BS 5 669 Notch Filter 622 SRS
655 BS 7 718 Picture Down 382 Stereo/Mono
TELEVISION. 652 ENTER...........# 398
0...............0 274 1...............1
398 0...............10 652 ENTER...........12
657 GUIDE...........15 526 2...............2
528 3...............3 268 4...............4
531 5...............5 271 6...............6
273 7...............7 525 8...............8
658 9...............9 575 DOWN............A/V Window
Down 323 UP..............A/V Window Up 300
RIGHT...........Am/Pm 495 TV/VIDEO........Ant
398 0...............AUX 495 TV/VIDEO........BS
657 GUIDE...........BS 9 334 CHANNEL DOWN /.Channel Down
657 GUIDE...........Channel Guide 684 LAST............Channel Return
594 CHANNEL UP /.Channel Up 563 LEFT............Clear
432 DISPLAY.........Data on Screen 432 DISPLAY.........Display
575 DOWN............Down 652 ENTER...........Enter
255 SELECT..........Execute 252 EXIT............Exit
258 MENU............Guide 495 TV/VIDEO........Input
684 LAST............Jump 575 DOWN............L
684 LAST............Last 563 LEFT............Left
575 DOWN............Level Down 323 UP..............Level Up
258 MENU............Menu 339 MUTE............Mute
305 SLEEP...........Off Timer 732 PIP.............PIP On
737 PIP MOVE........PIP Position 477 PIP SWAP........PIP Swap
591 POWER...........Power 495 TV/VIDEO........Program Select
323 UP..............R 255 SELECT..........Return
300 RIGHT...........Right 305 SLEEP...........Sleep
495 TV/VIDEO........TV/VCR/BS 495 TV/VIDEO........TV/Video
495 TV/VIDEO........TV/VTR 323 UP..............Up
591 POWER...........Visual On/Standby 588 VOLUME DOWN.....Volume Down
336 VOLUME UP.......Volume Up

Also found this site for more codes but most only 2 digits not 3 ...

Please help

lifeisfun wrote:Here is what I got from support: ( tried 732 )

TVs ------------------ <TV Group>
0000

732 PIP.............PIP On

How did you try that code? Did you add it to an exisiting upgrade, assign it as a key move, or try sending it direct from the key pad using the Set-#-#-# sequence?

Yes, tried 732 and it doesn't do nothing
( Also tested another code to make sure that the button works and I was able to map sleep to PIP without problems)
Used this :
1) Hold set until screen reads "code set"

2) Arrow down eight times to "key mover"

3) Press select, it should read "from mode"

4) Press the device key that you want the function to come from (ex: TV)

5) The screen will read "from key"

6) Tap the set button and it will read "SYNT"

7) Then press 3-digit advanced function code

8) Press select screen will read "to mode"

9) Tap the device key you want the function to go to (ex: TV)

10) Screen will read "to key"

11) Then tap the key where you want function to go to (ex: select)

12) Screen will flash success then exiting setup will appear

George

565 did the trick