JP1 Remotes

Over at Place Shifting a user has requested a BIN file for a TVIP ITV400. I cannot track it down, but he has provided the following codes (apparently it is a NEC device). Can we build a BIN file ?

Power = 0xe31cfe01,
Home = 0xf708fe01,

Red = 0xa956fe01,
Green = 0xa857fe01,
Yellow = 0xe01ffe01,
Blue = 0xa45bfe01,

Setup = 0xaa55fe01,
SysInfo = 0xa15efe01,
Internet = 0xae51fe01,
Zoom = 0xa659fe01,

PreviousChapter = 0xa55afe01,
Subtitle = 0xad52fe01,
Record = 0xa25dfe01,
NextChapter = 0xa35cfe01,

FastRewind = 0xfe01fe01,
PlayPause = 0xa05ffe01,
Stop = 0xe619fe01,
FastForward = 0xa758fe01,

Menu = 0xe718fe01,
Back = 0xe817fe01,

Up = 0xe51afe01,
Left = 0xb847fe01,
Ok = 0xf906fe01,
Right = 0xf807fe01,
Down = 0xb748fe01,

Info = 0xb649fe01,
EPG = 0xf50afe01,

VolumeUp = 0xb44bfe01,
VolumeDown = 0xb04ffe01,
Mouse = 0xfc03fe01,
Mute = 0xbd42fe01,
ChPageUp = 0xf609fe01,
ChPageDown = 0xfa05fe01,

1 = 0xab54fe01,
2 = 0xe916fe01,
3 = 0xea15fe01,
4 = 0xaf50fe01,
5 = 0xed12fe01,
6 = 0xee11fe01,
7 = 0xb34cfe01,
8 = 0xf10efe01,
9 = 0xf20dfe01,
Recall = 0xbe41fe01,
0 = 0xf30cfe01,
Delete = 0xef10fe01,

Thanks

Al

it's not totally clear how we're supposed to read that hex, but based on the fact that the last two bytes are fixed, I went with the assumption that you read it completely backwards, and so I came up with this...

https://www.hifi-remote.com/forums/dload ... e_id=13774

One possibility is reading right to left - device, complement, command, complement. I don't know the subdevice, possibly just zero.

So Power = 0xe31cfe01 means Device 1, OBC 1C (28 decimal)

Can you have the user try that?

Thanks both. See http://placeshiftingenthusiasts.com/for ... 00/#p11772

mdavej wrote:One possibility is reading right to left - device, complement, command, complement. I don't know the subdevice, possibly just zero.

So Power = 0xe31cfe01 means Device 1, OBC 1C (28 decimal)

Can you have the user try that?

Yup, that's exactly what I did, and I got OBC 28 for POWER also. The sub-device is not used as it is the complement of the device code.

Great minds think alike

Hi Guys, I am the user and I am so many time zones ahead that I had finished work and was at a cinema - I arrived home at 0045 to find all this info - but was scared to try - lest I would never sleep and be divorced.

I wish to thank Alan for passing my question on and for your time and effort.

Woke up at 0600 - I followed your advice to the letter and was certain it would work.

First time - it didn't worK..

I kept the faith and fitted the IR BLASTER supplied with the 350 - not necessary with a UK SKY satellite receiver - but hey ..

SUCCESS


THANK YOU, THANK YOU...

Good, glad you are sorted. And my thanks to the lads as well.

Good to hear. I am curious to know where you found the hex codes for the buttons.

hey
could someone try to help me to get the slinbox to work with the tvip s-box 410

http://tvip.ru/en/media-center/sbox-410

have tried to get this bin from this thread to work with it but no success

thanks johnny

The site where the codes above were found only lists the one remote code set, which would tend to imply that all boxes use the same code.

http://wiki.tvip.ru/en/ir_rc_s310_s400

Are you 100% confident that you know how to install a Slingbox bin and test it? Read the instructions in the link below and if it still doesn't work, post answers to the troubleshooting questions here.

https://www.hifi-remote.com/forums/viewtopic.php?t=16485

Hey i am pretty sure that i am doing it right,,, but probably i still doing something wrong, do you know if there is any youtube videos to follow, when someone add the bin file?
I have one slingbox solo and one pro hd and i did not get it working with either of them.
Johnny

Did you follow the link to the instructions thar Rob provided?