View previous topic :: View next topic |
Author |
Message |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21210 Location: Chicago, IL |
Posted: Thu Dec 03, 2015 3:54 pm Post subject: |
|
|
What operating system are you using? Because if it's Windows, it already has the ability to open and extract zip files as part of Windows Explorer, so WinRAR is not needed. But, none the less, if you have unzipped the file properly, under your DONE folder you should have several sub-folders, including Docs, Images and most importantly... RDF. Do you have these folders? If not, you didn't unzip properly.
I have mentioned several times what you need to do to point RMIR to the RDF folder, along with suggesting that having RMIR not find the RDFs is one of the causes of the message that you are getting, and so far you have not addresses that question.
You are making it very difficult to help you, which explains why so many of the experts have stopped. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4515 Location: Cambridge, UK |
Posted: Thu Dec 03, 2015 6:03 pm Post subject: |
|
|
Quote: | Just so I have this part correct to set the RDF PATH in RMIR program i click file, set directory, rdf path, then I highlight the folder that says RDF and click ok. Should there be a plus or minus sign to the left of the RDF folder icon? |
RMIR works "out of the box". You do NOT need to set RDF path, Maps path or anything else. These are all correctly set by default. If you have extracted the zip file into a folder (of your choice) then that is ALL that is needed. Double-click RemoteMaster.jar and it will open and work without further setup. You can run Setup.vbs if you wish, but it is not needed. All it does is create shortcuts and file associations to enable you to open RMIR in other ways than by double-clicking RemoteMaster.jar. _________________ Graham |
|
Back to top |
|
|
Steven Kovacs
Joined: 06 Aug 2015 Posts: 71
|
Posted: Thu Dec 03, 2015 6:37 pm Post subject: |
|
|
Hello mathdon;
Thank you for your help. I have RMIR loaded on my computer now. It looks just like it looked when I had the program back in August of this year when it worked perfectly, but for some reason unknown to me it got deleted from my computer. I have put RMIR back on my computer. I am using the same computer, same JP1 cable, same remote, and I get No Remotes Found. It is driving me crazy. I have checked the pin connections to the remote and they are fine, exactly as they were back in August. Batteries in remote are good. Any ideas why I keep getting No Remotes Found?
Thanks again for the help;
Steve |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4500
|
Posted: Thu Dec 03, 2015 6:56 pm Post subject: |
|
|
We're still not convinced you've put it back. Everything you've posted so far points to the jar being run from inside the zip file. Humor us and right-click the zip file and choose "Extract All". Make note of where you extracted it and run the jar from there. |
|
Back to top |
|
|
Steven Kovacs
Joined: 06 Aug 2015 Posts: 71
|
Posted: Thu Dec 03, 2015 7:09 pm Post subject: |
|
|
Thanks to everyone for their help and patience. I had RMIR working perfectly in August. I will get this fixed. I did run extract files again. I went to the folder I sent extraction to and clicked on Remote Master Jar File and RMIR opened perfectly. I still get No Remotes Found. Any ideas? |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3365
|
|
Back to top |
|
|
Steven Kovacs
Joined: 06 Aug 2015 Posts: 71
|
Posted: Thu Dec 03, 2015 7:31 pm Post subject: |
|
|
Hi 3fg;
Thank you for the help. I did what you said yesterday which was....
First, double check that you are hooking the interface wires to the correct pins.
Pins are fine.They are exactly as they were when it worked in August.
I still get No Remotes Found. Any ideas what it could be?
Thanks again.
Last edited by Steven Kovacs on Thu Dec 03, 2015 8:32 pm; edited 1 time in total |
|
Back to top |
|
|
Steven Kovacs
Joined: 06 Aug 2015 Posts: 71
|
Posted: Thu Dec 03, 2015 7:55 pm Post subject: |
|
|
I posted the err file in the Diagnosis file area. I'm not sure i did it correctly so below is a cut and paste of the err file.
MOD EDIT: Here's the file:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13739
I see no download attempt in that file. Can you try a download and upload your file again? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21210 Location: Chicago, IL |
Posted: Thu Dec 03, 2015 8:50 pm Post subject: |
|
|
Do you have any .rmir files saved from your current remote from your previous installation of RMIR? If so, have you tried opening one of them using RMIR? I have asked you this several times and so far you haven't responded. I am trying to determine if you have a problem with a missing RDF. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Steven Kovacs
Joined: 06 Aug 2015 Posts: 71
|
Posted: Thu Dec 03, 2015 8:58 pm Post subject: |
|
|
No I do not save anything. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21210 Location: Chicago, IL |
Posted: Thu Dec 03, 2015 9:03 pm Post subject: |
|
|
STEVEN KOVACS wrote: | No I do not save anything. |
Wow. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Steven Kovacs
Joined: 06 Aug 2015 Posts: 71
|
Posted: Fri Dec 04, 2015 12:50 am Post subject: |
|
|
Is there anything left that I can try? If anyone has any ideas I will try anything. And again I say thank you everyone for all your help. I'm sorry I do not understand this like you guys do but like I said it worked fine back in August. Also I don't understand why people don't talk on the phone anymore. I really believe it would make solving this problem easier. |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4515 Location: Cambridge, UK |
Posted: Fri Dec 04, 2015 12:09 pm Post subject: |
|
|
STEVEN KOVACS wrote: | Is there anything left that I can try? |
You can try providing us with some diagnostic information. Do whatever you do in your failed attempts to download from the remote, then close RMIR. Go to the installation folder for RMIR, where you will find a file called rmaster.err. Upload this file to the Diagnostics Area of this forum and post a link to it in this thread. It may give us some insight into what you are doing wrong. _________________ Graham |
|
Back to top |
|
|
Steven Kovacs
Joined: 06 Aug 2015 Posts: 71
|
Posted: Fri Dec 04, 2015 2:20 pm Post subject: |
|
|
I found the rmaster.err file, and I uploaded it in the Diagnostics Files. The link to the upload is...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13741
If anyone can tell me what this file says that would be great. It's all Greek ti me.
Thanks for everyone's help.
Steven Kovacs |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4500
|
Posted: Fri Dec 04, 2015 4:06 pm Post subject: |
|
|
It says your cable isn't functioning at all. Probably no driver was installed. Do you know how to look in device manager to see if a driver is loaded?
Can you post a picture or a link to a picture of your cable? Where did you buy it? |
|
Back to top |
|
|
|