Page 1 of 1
Nec1 device 4 urc the cheepest on ebay
Posted: Mon Nov 23, 2015 5:37 am
by turbogt16v
hy.
I need to buy URC for access the EZ menu on LG projector.
I read that it has to be Nec1 device 4.
So what is the cheapest model out there(ebay ,amazon),
i live in euprope
Posted: Mon Nov 23, 2015 6:00 am
by turbogt16v
helo,
i have found these in store near me,
will any of these work for LG EZmenu.
KONIG KN-RCU80B
VALUELINE VLR-RC001
KONIG KN-RCU20B
KONIG KN-RCU40B
Posted: Mon Nov 23, 2015 6:15 am
by vickyg2003
turbogt16v wrote:
will any of these work for LG EZmenu.
Probably NOT
You need a UEI remote that does keymoves. UEI remotes come in many flavors. On this website we are most interested in the remotes that we can modify work better with our tools. Generically we call these JP1 remotes, because of a label found on the first hackable remotes but now include JP1.x, USB and CommHid remotes as well. UEI has some cheaper lines that also do keymoves.
Here is a list of JP1 remotes, note there is
http://www.hifi-remote.com/wiki/index.p ... emoteChart
Posted: Mon Nov 23, 2015 7:34 am
by turbogt16v
OK WILL THIS MODEL DO
http://www.ebay.com/itm/281821851190
and is there cheaper
Posted: Mon Nov 23, 2015 7:40 am
by mdavej
No. You need one from the list above.
Posted: Mon Nov 23, 2015 8:18 am
by turbogt16v
Posted: Mon Nov 23, 2015 9:32 am
by mdavej
The Sky is closer but won't work because it has no button labeled SETUP.
Only one Vizio model will work, the VUR-8, not the one you posted.
Search for One-for-all brand.
Posted: Mon Nov 23, 2015 9:56 am
by turbogt16v
Posted: Mon Nov 23, 2015 10:18 am
by mdavej
Both of these from your list should work:
http://www.ebay.com/itm/181593128422
http://www.ebay.com/itm/121432994098
Use TV code 0178. The EFC for EZ Menu probably 00167, 00168, 00004, 00229 or 00171.
EDIT: Per Zaphod's post below, there are some NEC2 or 4 DEV combos with Device 4 and a variable subdevice we can try after you get the remote and a setup code list (TV 1993 or DVD 1526). Well have to calculate the EFC for you when the time comes.
Posted: Mon Nov 23, 2015 3:09 pm
by zaphod7501
Which projector is it? If it's the 1500 then it probably uses the same codes as the USA version and some other LG PJs. 00168 is probably the EFC for the "Quick Menu" (as it's called on the US versions) but the format is NEC1, device 4, subdevice 15, which may not be built in and you might require a device upgrade.
There are a number of discrete commands that will work that can be found in the LG master file that can be found in the file section. Danger! note there is a command called power-only that puts the set into a factory mode of some sort that may mess it up badly.
Posted: Tue Nov 24, 2015 12:08 am
by turbogt16v
it is pa1000 projector and its software is prob the same as 1500
so what device do i need that can be upgraded,and why
the man from other forum said that he opened it easy with a code,
on the URC 3920 so what device has same properties
,and will open the menu
Posted: Tue Nov 24, 2015 7:32 am
by mdavej
In that case, you can use the same codes he did.
Posted: Tue Nov 24, 2015 9:15 am
by turbogt16v
i can not find cheep URC 3920, its about 30$
will the other two do the same as this model
URC3910 seams to be very similar will he do the trick
Posted: Tue Nov 24, 2015 9:33 am
by mdavej
turbogt16v wrote:will the other two do the same as this model
Yes
URC3910 seams to be very similar will he do the trick
Yes
Posted: Sat Dec 12, 2015 1:07 am
by turbogt16v
OK URC3910 came yesterday.
but i can't make it work with the projector .
I have tried all the codes (4 numbers) that are written on manual.
need help