JP1 Remotes

hello i need a bin file for slingbox pro , with an kaon na1600hd


tkss

i want to use all the funtcions from the remote

Have you tried the Kaon KVR-1000 from the File Section ?

i tried all , it is working the menu and the channels , but i want to use the function to swat between channel and radio , and if i can to record !

Looking at the codes the record codes are the same (76) so I don't understand why you can't use that ?

And the instructions tell you that 'Input Radio' is on the White button (next to Blue). Does that not work ?

it is not working just chanel up and down and the menu buton the ok buton and that's it

sorry now i see i dont have in the list Kaon KVR-1000
i use Kaon KTFS660HDCO (Cable TV Box) , i dont have in the list from remote control setup kaon KVR-1000

V2010_RV.bin it is working for me i can record just i cannot swap from radio to tv you can see it here : http://razibine.net/slingbox.jpg i dont have tha white button

I can't access your picture, the link is broken, but if you are using V2010 then you definitely DO have a white button. As I said in my previous post it is next to the Blue button.

http://razibine.net/slingbox.jpg near the blue buton it is nothiong i cannout push

i used that bin .. if you habe another bin ...

OK, lets call it the Grey button then But from your picture it looks as though it is not available. Can you confirm where you downloaded the BIN file, i.e. the Exact URL ? (The V2010 means nothing, I use that for all my remotes, there are probably over a 1000 of them out there, all different)

http://www.hifi-remote.com/forums/dload ... le_id=6639


from here

Good, thanks. It looks as though the source code I had was because someone else asked for the same as you, for the radio to be on the White/Grey button but I never uploaded it for other users. So I have updated the BIN files. Same link.

Better ?

super tks :X