|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
tranx
Joined: 13 May 2012 Posts: 682 Location: Hants, UK |
Posted: Sun Jul 19, 2015 8:36 am Post subject: direction commands get more than one response - help please |
|
|
I have just stitched together an upgrade for a newish Sony 'Android' Tv, KD-49X83 in which many of the commands are the same as those in other other upgrades for Sony TVs.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13447
It works ok except that, when the direction buttons are used in macros the responses by the TV to up/down left/right, and even select, are sometimes repeated, which can cause overruns in various menus.
This is improved, but not always cured, by adding a dummy command after each direction.
Up: -EFC5 31557 - EFC 067 -Protocol Sony12 -device 1 -sub device none -OBC 116 -Hex 2E 80
Down: -30533 -063 -Sony12 -1 -none -117 -AE 80
Left: -27461 -051 -Sony12 -1 -none -52 -2C 80
Right: -25669 -044 -Sony12 -1 -none -51 -CC 80
Select: -14149 -255 -Sony12 -1 -none -101 -A6 80
I would be grateful for advice |
|
Back to top |
|
|
tranx
Joined: 13 May 2012 Posts: 682 Location: Hants, UK |
Posted: Mon Jul 20, 2015 10:50 am Post subject: |
|
|
PS
I noticed that signals from the original remote, learned to the same device, for Up, Down, Left, and Right show the same Protocols, Devices, Sub Devices, and OBCs but Hexs are different:-
Up 2E 2F instead of 2E 80
Down AE AF instead of AE 80
Left 2C 2D instead of 2C 80
Right CC CD instead of CC 80
Why is that the case please? and could it be relevant? |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Mon Jul 20, 2015 11:57 am Post subject: |
|
|
Those Hex codes correspond to Sony20, not Sony 12:
Fun. Protocol Dev OBC HEX
Up Sony20 20 116 2E 2F
Down Sony20 21 117 AE AF
Left Sony20 20 52 2C 2D
Right Sony20 19 51 CC CD
However, I've never seen Sony do anything like that. Usually they don't vary the device that much. |
|
Back to top |
|
|
madmalkav
Joined: 01 Sep 2011 Posts: 63
|
|
Back to top |
|
|
tranx
Joined: 13 May 2012 Posts: 682 Location: Hants, UK |
Posted: Mon Jul 20, 2015 4:18 pm Post subject: |
|
|
Thanks very much for the replies.
mdavej, yes on the functions page those keys do have Protocol Sony12.
I tried entering those numbers but the Sub-Device changes from 'none' to 'n/a', and the Hex is different again e.g. Up = Hex 2E 29, Right = CC 29 (and the buttons are not effective)
On the device's set up page: the Protocol is 'Sony Combo (12/15/20)', the protocol ID is 00 26, and the Protocol Parameter boxes for Sony20 Subdevs 1, 2, 3, and 4 are empty, while I noticed that on another Sony upgrade those boxes all contain a '0', would that make any difference? (fixed data is 00 00 00 00 in both cases)
madmalkav, I looked at the link but if the keys were simultaneously sent for a second device I can only guess that in my case the second versions would be ignored? |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Mon Jul 20, 2015 4:59 pm Post subject: |
|
|
Start with your original codes and just enter the hex, i.e., 2E 2F, and the other values will be calculated correctly.
If you post the file that includes your learns, maybe we an figure out the correct Sony20 sub-device to enter on the Setup and Functions tabs. |
|
Back to top |
|
|
tranx
Joined: 13 May 2012 Posts: 682 Location: Hants, UK |
Posted: Tue Jul 21, 2015 1:49 am Post subject: |
|
|
Starting with the original codes seemed to succeed, thanks, but that also resulted in keys which did not work.
Even using the working learns (with the hex as noted) the macros still cause skipping. Also, the skipping tendency is variable, just as with the keys from the original upgrade in macros.
- so I conclude that after all the problem is due to the TV sometimes being over-excitable but thanks very much for the quick advice
(the 'problem' with Hex, and a new thing noticed about greyed-out delete option in the functions page seem to be coincidental, and might be due to extender testing/RMIR so I will take that up separately) |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Jul 21, 2015 7:50 am Post subject: |
|
|
We have developed non repeating versions of most protocols for the slingbox, Any remotes using the Samsung processor can make use of these. These will not work on jp1.2, jp2 or higher. Can't remember what
You are running
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11416
Not sure if this is a complete ini, or the version you paste into your existing protocols.ini. hopefully the paste kind.
Hope this helps. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
tranx
Joined: 13 May 2012 Posts: 682 Location: Hants, UK |
Posted: Tue Jul 21, 2015 8:27 am Post subject: |
|
|
Thanks vicky. We are using URC6440 and OARUSB04G, jp1.3 (pity that sounds 'higher' ) and MAXQ622 (Samsung?) so would one of those versions work? |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Jul 21, 2015 11:24 am Post subject: |
|
|
Unfortunately with those remotes, the slingbox special protocols won't work. I could help with JP1.2 (Motorola) but MaxQ is out of my league. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Wed Jul 22, 2015 12:07 am Post subject: |
|
|
Add this to protocols.ini, and make an upgrade with this NoRepeats version. I tested this with a JP2 remote and it worked fine. Since you mention extender testing, I'll mention that I tried this NoRepeat protocol executor with a OARUSB04G which is running some experimental firmware. I had some difficulties which I'm not even able to describe coherently.
Code: | [Sony Combo (12/15/20) NoRepeats]
OldNames=Sony Combo,Sony Combo (new)
PID=01 27
VariantName=single
CmdParms=Protocol:Sony12|Sony15|Sony20,Device,Sub-device:none|1|2|3|4=0,OBC=0
CmdTranslator= SonyComboTranslator() Translator(lsb,3,7)
ImportCmdTranslator=SonyComboImporter()
CmdParmInit=PickInitializer(2,,n0,n1,n2,n3)
DevParms=Sony20 subdev1,Sony20 subdev2,Sony20 subdev3,Sony20 subdev4
DeviceTranslator=Translator(lsb,0,8) Translator(lsb,1,8,8) \
Translator(lsb,2,8,16) Translator(lsb,3,8,24)
FixedData=00 00 00 00
DefaultCmd=00 00
Code.MAXQ610=30 64 42 0E 30 00 18 00 18 00 18 00 08 07 60 00 18 00 02 41 01 83 1B 51 01 0C 12 D6 D5 01 16 D6 D6 03 53 D7 D0 D6 63 40 02 00 64 45 03 64 45 77 00 63 40 02 00 64 75
|
|
|
Back to top |
|
|
tranx
Joined: 13 May 2012 Posts: 682 Location: Hants, UK |
Posted: Wed Jul 22, 2015 1:35 am Post subject: |
|
|
3FG, thanks for the suggestion and comment. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|