JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

TMY HDR-ZS232E

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Protocol Decodes
View previous topic :: View next topic  
Author Message
chuliu



Joined: 04 Dec 2010
Posts: 442
Location: Hong Kong

                    
PostPosted: Sun Apr 05, 2015 3:44 am    Post subject: TMY HDR-ZS232E Reply with quote

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13293

I recorded the ict file to try to create slinngbox bin file. The protocol read as nec-f16, device code 51.0 and obc 1 is 48, and obc2=xx

If I follow the above to create a bin file using remotemaster, it won't control any thing.

I noticed the signal has no repeat no matter how long I press it. That may be a little tricky.

Please help create rmdu file. Thanks.

The buttons in the ict files are as follows:
1: power
2: display service
3: 3 digit input
4: digital terrestrial
5: BS
6: CS
7: 1
8: 2
9: 3
10: 4
11: 5
12: 6
13: 7
14: 8
15: 9
16: 10
17: 11
18: 12
19: menu
20: DATA
21: Guide
22: back
23: up
24: down
25: left
26: right
27: ok
28: ch+
29: ch-
30: vol+
31: vol-
32: inside channel
33: channel info
34: channel display
35: mute
36: blue
37: red
38: green
39: yellow
40: schedule list
41: record list
42: subtitles
43: audio
44: record setting
45: stop
46: playback
47: record
48: rewind
49: ffwd
Back to top
View user's profile Send private message
chuliu



Joined: 04 Dec 2010
Posts: 442
Location: Hong Kong

                    
PostPosted: Sun Apr 05, 2015 8:34 am    Post subject: Reply with quote

I managed to do it with a custom protocol.
with 1=(422,844), 0=(422,422)
and lead in = 3360 and - 1680, and lead out type=(one on, lead out), lead out off=-74767
the power button reads:
11001100 00000000 00001100 10001000
the 1 button reads:
11001100 00000000 00001100 01001000

the first 3 bytes are device code, the last byte is command byte.
with data type=dev-cmd and device data=3 bytes msb and command byte=1 lsb
I have deviec code=204, 0, 12 and obc for power=16, the same as irscope's read.

Therefore, with the custom protocol, device 1=204, device 2=0, device 3=12, and obc the same as irscope read, the rmdu works fine on my stb.


I will attach the rmdu later after I tide it up.

Here is the file:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13294

Thanks.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Protocol Decodes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control