JP1 Remotes

djhansensr · Joined: 20 Feb 2004 Posts: 7

I have a RS 15-2117 and I'm trying to learn in buttons for a JVC Receiver (RX-1028V), since the RS doesn't have a code for the JVC. Although the 2117 seems to learn in the buttons OK, when I download to IR, the EFC's are the same for all buttons. I've tried re-learning, but no help.

Any idea as to why I would have this problem, and what the solution might be?

Thanks,
Dean

johnsfine · Posted: Thu Mar 04, 2004 8:00 am Post subject:

My first guess is that IR.EXE is decoding the signals with its built-in old decoders rather than finding DecodeIR.dll. Did you put DecodeIR.dll where IR.EXE can find it?

Beyond that, it's best to upload the eeprom image (From IR's file save command) containing those learned signals to the Yahoo JP1 diagnosis folder. Then we can tell what is really happening rather than guess.

djhansensr · Joined: 20 Feb 2004 Posts: 7

I had DecodeIR.dll (dated 2/5/04, 100k) in the same directory as IR. I also tried changing the batteries of the original remote, as noted in another message in the group. No luck.

I uploaded the image to the diagnosis folder. Here's the filename:

RS15-2117_djhansensr.txt

Thanks for your help.
Dean

The Robman · Posted: Thu Mar 04, 2004 6:09 pm Post subject:

I re-named your file as it's not a good idea to give memory dumps the .rdf extention, plus I changed it to a link.

It's always a good idea to provide links to files to make it easier for the experts to help you.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

jon_armstrong · Posted: Sat Mar 06, 2004 4:54 pm Post subject:

Well your commands ARE different from all the other JVC commands that I have seen. I found a ccf file at RC for the exact model. The RX-1028 apparently uses two different commands somewhat like Pioneer. Command one is JVC{1} for dev 1 /obc 1 + four JVC{2} for dev 1 /obc 1

Command two is a perfect JVC (meaning JVC{1} + repeating JVC{2}) for dev 2 /obc 2 If two commands are listed then it was consistent with the above.

The interesting question is that since most JVC receivers use the same single device 163 commands without the 175:110 prefix, will the regular JVC commands work. I just Posted Audio_1074 in the JP1 Yahoo group files|devices|audio that adds the old Audio_0074device code to the 2116. Please upload that simple upgrade (that uses device 163 only) to your 2116 and try some of the commands to see if they work. The Power commands didn't appear to be good learns in the ccf file, so manually turn the unit on and check a few of those commands and see if they do annything. The numeral 0 in the upgrade should select CD.

(JVC):163:88 EFC=229 SURROUND MODE
(JVC):175:110 EFC=070 (JVC):3:24 EFC=245 Chan-
(JVC):175:110 EFC=070 (JVC):3:25 EFC=249 Chan+
(JVC):175:110 EFC=070 (JVC):163:3 EFC=187 SLEEP
(JVC):175:110 EFC=070 (JVC):163:5 EFC=184 SURROUND ON/OFF
(JVC):175:110 EFC=070 (JVC):163:11 EFC=059 FM/AM
(JVC):175:110 EFC=070 (JVC):163:16 EFC=117 TV/DBS
(JVC):175:110 EFC=070 (JVC):163:17 EFC=121 VCR 1
(JVC):175:110 EFC=070 (JVC):163:18 EFC=119 VIDEO
(JVC):175:110 EFC=070 (JVC):163:28 EFC=244 Mute
(JVC):175:110 EFC=070 (JVC):163:30 EFC=246 Vol+
(JVC):175:110 EFC=070 (JVC):163:31 EFC=250 Vol-
(JVC):175:110 EFC=070 (JVC):163:56 EFC=021 SEA MODE
(JVC):175:110 EFC=070 (JVC):163:60 EFC=020 PHONO
(JVC):175:110 EFC=070 (JVC):163:61 EFC=024 CD
(JVC):175:110 EFC=070 (JVC):163:63 EFC=026 TAPE/MD
(JVC):175:110 EFC=070 (JVC):163:67 EFC=171 DVD
(JVC):175:110 EFC=070 (JVC):163:71 EFC=170 VCR 2
(JVC):175:110 EFC=070 (JVC):163:78 EFC=038 +
(JVC):175:110 EFC=070 (JVC):163:79 EFC=042 -
(JVC):175:110 EFC=070 (JVC):163:112 EFC=133 TEXT DISPLAY
(JVC):175:110 EFC=070 (JVC):163:116 EFC=132 INPUT
(JVC):175:110 EFC=070 (JVC):163:214 EFC=110 DVD MULTI
(JVC):175:110 EFC=070 (JVC):163:215 EFC=114 TEST
(JVC):175:110 EFC=070 (JVC):163:216 EFC=237 +
(JVC):175:110 EFC=070 (JVC):163:217 EFC=241 -
(JVC):175:110 EFC=070 (JVC):163:221 EFC=240 +
(JVC):175:110 EFC=070 (JVC):163:231 EFC=210 CNTR TONE
(JVC):175:110 EFC=070 (JVC):163:232 EFC=077 +
(JVC):175:110 EFC=070 (JVC):163:233 EFC=081 -
(JVC):175:110 EFC=070 (JVC):163:237 EFC=080 -
(JVC):175:110 EFC=070 (JVC):175:0 EFC=181 EFFECT
(JVC):175:110 EFC=070 (JVC):175:111 EFC=074 MAIN ROOM ON/OFF
(JVC):175:110 EFC=070 (JVC):175:112 EFC=133 Up Arrow
(JVC):175:110 EFC=070 (JVC):175:113 EFC=137 Down Arrow
(JVC):175:110 EFC=070 (JVC):175:114 EFC=135 Right Arrow
(JVC):175:110 EFC=070 (JVC):175:115 EFC=139 Left Arrow
(JVC):175:110 EFC=070 (JVC):175:118 EFC=134 MENU
(JVC):175:110 EFC=070 (JVC):175:120 EFC=005 EXIT
(JVC):175:110 EFC=070 (JVC):175:121 EFC=009 SET
(JVC):175:126 EFC=006 (JVC):163:3 EFC=187 SLEEP
(JVC):175:126 EFC=006 (JVC):163:11 EFC=059 FM/AM
(JVC):175:126 EFC=006 (JVC):163:16 EFC=117 TV/DBS
(JVC):175:126 EFC=006 (JVC):163:17 EFC=121 VCR 1
(JVC):175:126 EFC=006 (JVC):163:18 EFC=119 VIDEO
(JVC):175:126 EFC=006 (JVC):163:60 EFC=020 PHONO
(JVC):175:126 EFC=006 (JVC):163:61 EFC=024 CD
(JVC):175:126 EFC=006 (JVC):163:63 EFC=026 TAPE/MD
(JVC):175:126 EFC=006 (JVC):163:67 EFC=171 DVD
(JVC):175:126 EFC=006 (JVC):163:71 EFC=170 VCR 2
(JVC):175:126 EFC=006 (JVC):163:214 EFC=110 DVD MULTI
(JVC):175:127 EFC=010 SUB ROOM ON/OFF
_________________
-Jon

djhansensr · Joined: 20 Feb 2004 Posts: 7

I used the 163 device code and the associated OBC's, and they worked! The power button turned out to be 163:23.

The only outstanding issue is that there are a few buttons on the original remote, such as the arrow keys, that use the 175 device code. Any idea on how to handle this one?

Also, I can now see how useful these ccf files can be. Since I'm fairly new at this, how do you use/view the ccf's to extract this info?

Thanks for all of the help. Now I can release the remote to the wife and kids!

Dean

gjarboni · Posted: Tue Mar 09, 2004 1:21 am Post subject:

jon_armstrong · Posted: Tue Mar 09, 2004 11:53 am Post subject: