Page 1 of 1
Blaze BL32-A lcd TV
Posted: Sat Jun 07, 2014 8:37 am
by ferreyrafederico
Hello I'm Federico from Argentina, I have a brand lcd model blaze BL32-A and I want to sync with my universal remote urc2025, and perform automatic code search does not work and me, you can add a brand new, thanks
Posted: Sun Jun 08, 2014 1:13 pm
by vickyg2003
Federico,
You didn't use the required template, so it is a little difficult to help. I did do some research and can't find any information on a Blaze LCD IR signal anyway.
Since you don't have a learning remote, there is very little we can do to help.
Did you do a complete code search? Lots of people give up before they get to the end of the list. Most of the remote s have 100s of codes to search.
If you did a complete search and didn't find anything that worked, the only other thing that might give you a lead a is to run through the list again and see if your LCD gives you an acknowledging blink. That might indicate a similar code with different functions.
If you found one that makes your LCD blink try all the buttons to see if they do anything.
Good luck
Posted: Sun Jun 08, 2014 4:18 pm
by ferreyrafederico
Vickyg2003 Hi thanks for your answer.
I found a code that works but with all the functions changed, there is any way you order the keys.
Posted: Sun Jun 08, 2014 5:08 pm
by vickyg2003
ferreyrafederico wrote:Vickyg2003 Hi thanks for your answer.
I found a code that works but with all the functions changed, there is any way you order the keys.
Yes there is a way to order the keys. We do that with keymoves. Can you tell me what the setup code is? There is a blinkback function that will help us get the number.