JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

RCA RCRP05B Communication Issue

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
GameGod



Joined: 24 Jan 2005
Posts: 48
Location: California

                    
PostPosted: Sun Mar 09, 2014 12:39 pm    Post subject: RCA RCRP05B Communication Issue Reply with quote

Not sure what I did, but the remote is no longer being recognized by RMIR. I tried a factory reset (via Setup + 980 & Setup + 981).

When I try to communicate, the device button flashes once, like usual, and then immediately after I get the "No remotes found" message and a double flash right after, as if it has completed programming.

The cable is fine, because it works with the other remote just fine. I installed new batteries, in case it was that, but no luck. I double checked to make sure the connector was not reversed, to eliminate that as well.

This is the relevant piece from the log file:
Code:

RemoteMaster v2.02a
System Properties:
   java.version = 1.6.0_10
   java.vendor = Excelsior, LLC
   os.name = Windows Vista
   os.arch = x86
   java.home = C:\Program Files (x86)\RemoteMaster\rt
   java.class.path = RemoteMaster.jar
Adding to classpath: file:/C:/Program%20Files%20(x86)/RemoteMaster/

...
...

libraryFolder=C:\Program Files (x86)\RemoteMaster\Windows-x86
Loading C:\Program Files (x86)\RemoteMaster\Windows-x86\jp12serial.dll
Loaded C:\Program Files (x86)\RemoteMaster\Windows-x86\jp12serial.dll
    JP12Serial version 0.19
Loading C:\Program Files (x86)\RemoteMaster\Windows-x86\jp1usb.dll
Loaded C:\Program Files (x86)\RemoteMaster\Windows-x86\jp1usb.dll
    JP1USB version 0.031
    EEPROM size returns -1
    EEPROM address returns 0
Loading C:\Program Files (x86)\RemoteMaster\Windows-x86\jp1parallel.dll
Loaded C:\Program Files (x86)\RemoteMaster\Windows-x86\jp1parallel.dll
    JP1Parallel version 0.02
    EEPROM size returns -1
    EEPROM address returns 0
Loading C:\Program Files (x86)\RemoteMaster\Windows-x86\DecodeIR.dll
Loaded C:\Program Files (x86)\RemoteMaster\Windows-x86\DecodeIR.dll
Starting normal download
Interface Name = JP1.X Serial
Port Name = COM4
Testing interface: JP1.X Serial
Interface matched.  Trying to open remote.
Failed to open
Testing interface: JP1 USB
Testing interface: JP1 Parallel
Starting normal download
Interface Name = JP1.X Serial
Port Name = COM4
Testing interface: JP1.X Serial
Interface matched.  Trying to open remote.
Failed to open
Testing interface: JP1 USB
Testing interface: JP1 Parallel


Please help!

Thanks.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control