RCA RCRP05B Communication Issue
Posted: Sun Mar 09, 2014 11:39 am
Not sure what I did, but the remote is no longer being recognized by RMIR. I tried a factory reset (via Setup + 980 & Setup + 981).
When I try to communicate, the device button flashes once, like usual, and then immediately after I get the "No remotes found" message and a double flash right after, as if it has completed programming.
The cable is fine, because it works with the other remote just fine. I installed new batteries, in case it was that, but no luck. I double checked to make sure the connector was not reversed, to eliminate that as well.
This is the relevant piece from the log file:
Please help!
Thanks.
When I try to communicate, the device button flashes once, like usual, and then immediately after I get the "No remotes found" message and a double flash right after, as if it has completed programming.
The cable is fine, because it works with the other remote just fine. I installed new batteries, in case it was that, but no luck. I double checked to make sure the connector was not reversed, to eliminate that as well.
This is the relevant piece from the log file:
Code: Select all
RemoteMaster v2.02a
System Properties:
java.version = 1.6.0_10
java.vendor = Excelsior, LLC
os.name = Windows Vista
os.arch = x86
java.home = C:\Program Files (x86)\RemoteMaster\rt
java.class.path = RemoteMaster.jar
Adding to classpath: file:/C:/Program%20Files%20(x86)/RemoteMaster/
...
...
libraryFolder=C:\Program Files (x86)\RemoteMaster\Windows-x86
Loading C:\Program Files (x86)\RemoteMaster\Windows-x86\jp12serial.dll
Loaded C:\Program Files (x86)\RemoteMaster\Windows-x86\jp12serial.dll
JP12Serial version 0.19
Loading C:\Program Files (x86)\RemoteMaster\Windows-x86\jp1usb.dll
Loaded C:\Program Files (x86)\RemoteMaster\Windows-x86\jp1usb.dll
JP1USB version 0.031
EEPROM size returns -1
EEPROM address returns 0
Loading C:\Program Files (x86)\RemoteMaster\Windows-x86\jp1parallel.dll
Loaded C:\Program Files (x86)\RemoteMaster\Windows-x86\jp1parallel.dll
JP1Parallel version 0.02
EEPROM size returns -1
EEPROM address returns 0
Loading C:\Program Files (x86)\RemoteMaster\Windows-x86\DecodeIR.dll
Loaded C:\Program Files (x86)\RemoteMaster\Windows-x86\DecodeIR.dll
Starting normal download
Interface Name = JP1.X Serial
Port Name = COM4
Testing interface: JP1.X Serial
Interface matched. Trying to open remote.
Failed to open
Testing interface: JP1 USB
Testing interface: JP1 Parallel
Starting normal download
Interface Name = JP1.X Serial
Port Name = COM4
Testing interface: JP1.X Serial
Interface matched. Trying to open remote.
Failed to open
Testing interface: JP1 USB
Testing interface: JP1 Parallel
Thanks.