Page 1 of 1
Apple TV
Posted: Sat Mar 01, 2014 2:29 pm
by barnabybeer
Hi, My apple TV 1 remote has died, can I replace it with a One for all or similar? I have a Sony blu ray, TV and AV receiver, so perhaps the replacement remote could control all four pieces of kit? Many thanks.
Posted: Sun Mar 02, 2014 3:49 pm
by vickyg2003
Well you can control the AppleTV if you have a UEI remote and the appropriate cable. We have seen AppleTV upgrades.
I think the RCA RCP05B might have control natively, but that would be a total guess on my part.
Posted: Sun Mar 02, 2014 5:47 pm
by 3FG
As I understand it, Apple TV uses the same commands as other Apple equipment, and the following remotes have the 01E0 PID executor.
Code: Select all
11781178 (URC-6820N_8820N_10820N).rdf
201009 (Atlas 1056 B03).rdf
202608 (Charter OCAP C4000 URC-1060BC2).rdf
204907 (URC-7962 OFA Smart Control Motion).rdf
253602 (URC-8820BC0).rdf
253701 (URC-8820BC1).rdf
254601 (URC-2025).rdf
255602 (Comcast URC-1067BC4).rdf
30853085 (RS 15-133).rdf
30853085 (RS 15-134).rdf
30853085 (RS 15-135).rdf
311902 (Titan URC-2056-I).rdf
31473147 (Insignia Remote 67100)B.rdf
316405 (Sky URC-1672).rdf
31793179 (RCA RCRP05B black).rdf
322403 (URC-7960 One For All 6+3).rdf
326605 (URC-7120_7130_7140 OFA Essence).rdf
329304 (URC 11-2981 R00).rdf
329801 (OARI06G One For All 6+3).rdf
336402 (Bell URC-62440).rdf
USB8001 (XSight Touch URC-8603).rdf
USB8007 (Nevo C3).rdf
USB8008 (XSight Lite URC-8610).rdf
USB8011 (ARRX12G).rdf
I think the only issue is getting the TV to go into standby, but it will do it by itself if it is left unused.
Also, any newer OneForAll should work.