JP1 Remotes

How do I get a bin file for this device?

Who is the manufacturer (AzAmerica ?)

I really dont know.

I search everything and don't know who is the manufactor.

This is the deco: pictures

http://www.az-br.com/viewtopic.php?f=97&t=36306



I found some clues that the manufactor could be:

SOC STI
HD DUO
VICXON
SonicView


I found two remotes:

Samsung digital - can change channel. Only this
Philips Vision - Work the numbers. Only this! If this Remote could press enter, would be great.

alexscampos wrote:Samsung digital - can change channel. Only this
Philips Vision - Work the numbers. Only this!

What are the model numbers for those boxes. I can probably find a match i I know that.

At the back there is a code bar and underneath there is a number:

HD12A10192

No, I need to know EXACTLY what Samsung Model and Philips Model remotes that partially work. There are dozens of them, all with different codes.

Philips Visiopass (Cable TV Box)
Numbers works fine.

Samsung Digital (Cable TV Box)
Cursor Right = channel up
Cursos Down = Channel Down

alexscampos wrote:Philips Visiopass (Cable TV Box)
Numbers works fine.

OK found that

alexscampos wrote:Samsung Digital (Cable TV Box)

Pointless, Samsung make dozens of Digital boxes, each with a different code. I need a PROPER model number, something like Samsung CMT-S2510, Samsung DTB9401V, Samsung UE32B6000...

Looking at the Philips box this uses the same codes as the following, so try each one in turn and see what we get. (But ONLY if you have an older Slingbox, if you have a 350/500 then you can't do this directly, we will have to try something else.

https://www.hifi-remote.com/forums/dload ... e_id=11501

https://www.hifi-remote.com/forums/dload ... le_id=7102

https://www.hifi-remote.com/forums/dload ... e_id=10631

The instructions are all out of date so you need to follow the instructions at:

http://placeshiftingenthusiasts.com/for ... -350500-1/

If you have a Pro-HD then use the PL.BIN file. For other Slingboxes try both the files.

Once you have completed the setup and the BIN files have been downloaded to the Slingbox they are not used any more and can be deleted.

Al

Tried more than 100's of custom bin files.


Here is the most close.

Samsung Digital (Cable TV Box) - I found this when you set up the slingbox for the first time. There is a Samsung/digital that works the channels.

Cursor Right = channel up
Cursos Down = Channel Down


S1786_PL.bin - SonicView SV-HD8000.zip

Channel - = Page -
Channel + = Page +
Enter = selec audio

Select/ok = OK
Power button = ok
Cursor UP = ok
Cursor Down = ok
Numbers = ok
Last Channel = ok
Guide = ok
Info = ok


Samsung DCB-B270Z - c113_PL

Cursor UP = Pause
Cursos Down = Search Channel
Channel UP = Configuration

OK, getting there slowly.

Now try this one:

https://www.hifi-remote.com/forums/dload ... e_id=11626

C2010_PL.bin - @TTONET3

Cursor UP = Channel +
Cursor Down = Channel -
Cursor Right = Volume +
Cursor Left = Volume -
Channel + = page +
Channel - = page -

Selec/ok = ok
Menu = ok
Exit = ok
Guide = ok
Info = ok
Last = ok
Power=ok
Enter = Audio


Can you make one final control, and use the codes from these other controls?

The perfect control for my device would be:

C2010_PL.bin - @TTONET3

Cursor UP = Channel +
Cursor Down = Channel -
Cursor Right = Volume +
Cursor Left = Volume -
Channel + = page +
Channel - = page -

power = ok
Selec/ok = ok
Menu = ok
Exit = ok
Guide = ok
Info = ok
Last = ok
Numbers = ok
Enter = Audio

PLUS

S1786_PL.bin - SonicView SV-HD8000.zip

Cursor UP = ok
Cursor Down = ok


PLUS

Samsung DCB-B270Z - c113_PL

Cursor UP = Pause
Cursos Down = Search Channel



Thanks. If possible. It would be great and a perfect control for me!

Afraid not. There are some inconsistencies in what you are telling me, i.e. that Cursor Up works correctly in the SonicView but operates as CH+ in the @TTNET, although they both use Code 33. And the Samsung DCB box uses a completely different IR Protocol, it is a pure coincidence that those buttons match.

So best I can manage so far is at

https://www.hifi-remote.com/forums/dload ... e_id=12235

Where do we stand with this one ?

Cursor UP = ok
Cursor Down = ok
Cursor Right = Volume + - ok
Cursor Left = Volume - - ok
Selec/ok = ok
Channel + = ok
Channel - = ok
page + = ok
page - = ok
power = ok
Guide = ok
Menu = ok
Info = ok
Exit = ok
Last = ok
Numbers = ok

This .bin is 90% OK

Can you add the red button to select audio?

C2010_PL.bin - @TTONET3
Enter (between 9 and zero)= select Audio

If you add the audio for me is a 100% perfect remote control.

If not. Still a REALLY GOOD REMOTE CONTROL!


THANKS SO MUCH! You fix a remote so FAST!

OK, added

https://www.hifi-remote.com/forums/dload ... e_id=12235

Cheers

Al