Samsung dcb-i560g

kristy_brasov · Post by **kristy_brasov** » Sat Sep 21, 2013 2:02 pm

Hello, I just bought a Samsung DCB-I560G without a remote and i need good codes. WAV file is best for me.

1. Device: Samsung dcb-i560g
2. Type of device: cable
3. Year: i dont know
4. JP1/UEI Remote model: Kameleon URC-8060
5. Do you have a JP1 cable? No
6. Still have original remote? No
7. Checked the file section? Yes. https://www.hifi-remote.com/forums/dload ... le_id=9319 Only the numbers work. No power or Menu.
8. Checked Pronto file section (at R/C)?
9. Partially working setup code? 1174 from ''the robman''
file
10. Learning remote question?
11. Have you tried the JP1 Lookup Tool? yes. nothing works at all.

MOD EDIT: ... and the genesis of this upgrade, in case someone wants to take a crack at it: https://www.hifi-remote.com/forums/viewtopic.php?t=12816

Post by **vickyg2003** » Sun Sep 22, 2013 3:59 am

kristy_brasov, Before we revisit that horrible protocol, could we see the WAV file that you created, and the IR file that you created it from? I'm really hoping you made an error . That would be a lot easier than trying to figure this thing out!

kristy_brasov · Post by **kristy_brasov** » Sun Sep 22, 2013 4:59 am

I have upload the wav file here https://www.hifi-remote.com/forums/dload ... e_id=12071

Is very possible that i have made some mistakes because is the first time i learn and use this stuff.

Sorry for my english.

Post by **vickyg2003** » Sun Sep 22, 2013 5:39 am

Hi Kristi,
Thank you for posting the WAV. You have done everything correctly. So we'll have to look into this further.

I see that you are from Romania, so I've google translated this from English to Romanian and back, so hopefully I am expressing myself correctly.
------------------------
Hi Kristi,
Vă mulțumim pentru a posta WAV. Ați făcut totul corect. Așa că va trebui să se uite în acest departe.

Văd că ești din România, așa că am tradus Google acest din engleză în română și înapoi, deci sperăm că am eu exprima corect.

kristy_brasov · Post by **kristy_brasov** » Sun Sep 22, 2013 7:14 am

Google translation in romanian is 85% good but i understand english 100% so you can write me in english. In have difficulties only writeing in english.

I found on amazon that a replacement remote for this samsung also works on other satellite and cable receivers: Samsung DCB i560G, Philips DIS 2221, Thomson DCI-12 PRE, Thomson DSI-12 PRE-ND, Humax iFox and is called Original Premiere remote PRC - 20.
Maybe someone have files for those devices. I searched file selection but no result.

I saw that robman in his picture he has done something with key 0 to 9 and those key are the only ones working maybe he can fix the other keys too.

Thanks any way for the interest.

Post by **vickyg2003** » Sun Sep 22, 2013 3:42 pm

These signals are now decodable with the latest tools. They decode as Humax 4Phase 7.32 .
I installed the upgrade in a remote.
I tested the Numbers, Power, Menu, UpArrow, DownArrow, LeftArrow, and RightArrow.
All the signals match the decodes.

I am unfamilar with the 8060, but I see in the "GENERAL TAB", that there is an unusual channel CH setting. Perhaps you have triggered something there, since only the numeric keys seem to work for you.

kristy_brasov · Post by **kristy_brasov** » Tue Sep 24, 2013 11:57 am

The keys workig are : 1. 2. 3. 4. 5. 6. 7. 8. 9. 0. Ch+ Ch- and the key PP that changes between last seen channels.

Very important for are also Menu, directional key and Select.

In can test wav file designed only for one key if you can extract somehow form this KM using your tools.

Post by **vickyg2003** » Tue Sep 24, 2013 3:20 pm

I thought this would be so easy. We would just use the humax protocol and fill in all the. OBC.

I was wrong. The Humax protocol is broken and I don't know how to do the hex conversions by hand

We need 3Fg or Rob man to give some guidance.

3FG · Post by **3FG** » Tue Sep 24, 2013 11:27 pm

I don't remember the history here, but roughly speaking RMIR, protocols.ini, and DecodeIR v2.44 were updated to change to D:6, S:6 from D:7, S:5, but the upgrades weren't. Or something like that. We also renamed the IR protocol from Humax to Humax 4Phase.

Anyway, I have uploaded a revised upgrade for the Humax Fox C, which does load correctly into RMIR and seems to shoot the correct signals. Presumably it will work for the Samsung also.

Once we've established that the upgrade works, then we'll probably need to clean up some of the other upgrades, so that we have functioning ones for the other brands/models. If we don't do that, we'll have a mismatch between any decodes and the device.subdevice numbers in the older upgrades.

Post by **vickyg2003** » Wed Sep 25, 2013 4:55 am

Perhaps something is wrong with my protocols.ini, but I don't know how to figure out if there is a version later than the one I have. But what Kristy needs right now is to be able to test all the OBCs to see if we can find the Power and Menu keys, since our decodes do not work. But when I enter the OBCs they change into jibberish. The OBCs in that file change into jibberish. I thought I had the latest and greatest, as I updated all of this stuff in April, but apparently I got a bad version of some file because 75% of the OBCs are garbage.

3FG · Post by **3FG** » Wed Sep 25, 2013 10:04 am

The very latest version is at Source Forge, but the ones distributed with 2.02a or newer all should work.

Code: Select all

[Humax 4Phase]
PID=01 DD
CmdParms=OBC:7=0
DefaultCmd=00 00
CmdTranslator=BitExpander(0,3,0,1,4,03,01,08,0C) BitExpander(0,1,12,0,4,01,08)
DevParms=Device:6=7, subDevice:6=32
FixedData=C3 1C 83 33
DeviceTranslator=BitExpander(0,3,4,0,4,03,01,08,0C) BitExpander(1,3,16,0,4,03,01,08,0C)
Notes=
Code.S3C80=2C 5E 42 8B 0E 8F 00 08 08 00 34 00 00 00 00 00 26 B5 73 F6 01 46 56 06 FD F6 01 0A 7B F5 AF

If this corresponds to the entry in your protocols.ini file, then we need something more descriptive than "jibberish" and "garbage".

The upgrade referenced in the first post in this thread was prepared before we understood the Humax 4Phase IR protocol. Rob wrote the executor on partial learns, and I believe that he only really had confidence in the number keys.

I strongly encourage kristy to make a wav file from the upgrade I posted. These OBCs have been tested with the Samsung receiver, I believe.

kristy_brasov · Post by **kristy_brasov** » Wed Sep 25, 2013 11:56 am

I have made the wav file from upgrade Humax Fox C and nothing works.
https://www.hifi-remote.com/forums/dload ... e_id=12079

Post by **vickyg2003** » Wed Sep 25, 2013 12:03 pm

Oh shoot, I haven't looked at that yet,
and what I have is an image that gives you 127 possible choices minus the 11 that you already had.

I didn't test these to see what they shoot though.

I prepared this file for you,
https://www.hifi-remote.com/forums/dload ... e_id=12080

kristy_brasov · Post by **kristy_brasov** » Wed Sep 25, 2013 12:34 pm

ok, i loaded \ transfered the wave you created to my remote. Codes 1174, 0001,0002 are not recognized by the remote so i can not activate and use them. Code 0003 can be selected and use by the remote but nothing works.

Post by **vickyg2003** » Wed Sep 25, 2013 12:54 pm

kristy_brasov wrote:ok, i loaded \ transfered the wave you created to my remote. Codes 1174, 0001,0002 are not recognized by the remote so i can not activate and use them. Code 0003 can be selected and use by the remote but nothing works.

Doh, I made a rookie mistake and forgot to add the protocol.
Try again.