Page 1 of 1
I need remote for satellite Maspro DT400
Posted: Mon Jul 01, 2013 10:46 am
by hikaru7
My slingbox is pro HD, hope someone can share remote bin of Maspro DT400.
Posted: Tue Jul 02, 2013 4:39 am
by alanrichey
Does the Maspro DT35 remote not work ?
Posted: Tue Jul 02, 2013 8:43 am
by hikaru7
I didn't try it because I've found someone post that not workable.
Posted: Tue Jul 02, 2013 10:50 am
by vickyg2003
Alan, you had the Maspro DT330 in the archive section that uses a Mitsubishi device 71 protocol, while Eferz's DT35 uses Nec1 202.90.
I assume if its in the archive section, that means that the person requesting it never left feedback, and Eferz's attempt was "unconfirmed".
I didn't try it because I've found someone post that not workable.
Hikaru7, could you please try Alan's
Maspro DT330
https://www.hifi-remote.com/forums/dload ... le_id=9686
And
Efere'z Maspro DT35
https://www.hifi-remote.com/forums/dload ... le_id=8948
and let us know if either works.
Posted: Thu Jul 04, 2013 10:40 pm
by hikaru7
I have tried both codes and make sure light bulb is ok through camera lens.
But unfortunately don't work at all.
I have remote controller+USB IrDA+PC
Is there any other way can solve this problem?
Posted: Fri Jul 05, 2013 5:29 am
by alanrichey
Posted: Fri Jul 05, 2013 9:02 am
by hikaru7
I upload the C2010_PL.bin file by web setup, the remote pannel apears but buttons can not be pushed. same situation as another RV file.
I also try to upload bin by setup assistant, I put the file in SBAV folder. but shows "Custom remote code not found. Please try a different code".
It still not workable to me.
Posted: Fri Jul 05, 2013 9:36 am
by alanrichey
Sorry, my fault, I didn't build it properly. Try again with the new copy (same URL)
Posted: Fri Jul 05, 2013 10:28 am
by hikaru7
Alan, great thanks to you. Power on/off is ok; channel up/down is ok; numeric pad is ok; Guide, Menu and Info buttons are ok.
I have no idea how you can do it, awesome!!
Posted: Fri Jul 05, 2013 11:52 am
by alanrichey
Good, glad it worked