Page 1 of 1
in need of a custom remote (bin file) for my slingbox 500
Posted: Tue Apr 02, 2013 5:03 pm
by herbertdizon
brand:skyworth
model :hc7620
https://www.hifi-remote.com/forums/dload ... e_id=11818
im willing to donate to jp1 website if someone can help me
Posted: Tue Apr 02, 2013 8:46 pm
by vickyg2003
herbert,
If a signal isn't decoding properly, we need a complete set to try and find the pattern in the timings.
Also, make sure that you get your One for All remote flashing BEFORE you press the button on the OEM remote.
I'm only seeing one signal in that IR file, and it looks more like the trailing dittos, than the actual signal.
Does your cable box respond to this strange looking learn? I wouldn't think it would.
Posted: Wed Apr 03, 2013 4:59 am
by herbertdizon
vickyg2003 wrote:herbert,
If a signal isn't decoding properly, we need a complete set to try and find the pattern in the timings.
Also, make sure that you get your One for All remote flashing BEFORE you press the button on the OEM remote.
I'm only seeing one signal in that IR file, and it looks more like the trailing dittos, than the actual signal.
Does your cable box respond to this strange looking learn? I wouldn't think it would.
I edited my file and should i used the One for all remote on my cable box after learning commands from the OEM remote so i can be sure it is working hope for a quick reply
Posted: Mon Dec 16, 2013 3:43 am
by henn9438
This is a "Pioneer 2CMD" signal. It has one device but the OBC switches with each frame.