JP1 Remotes

I got a new device, so I'm back again. Always interesting re-learning this JP1 stuff every couple of years.

Anyhow, I have an Atlas 5 Day URC-1055 remote. I have a Fios Cable box and Panasonic Viera TC-L42E5 TV.

I found a pretty close Panasonic remotemaster device upgrade and loaded that and customized it to my liking.

I have pretty much everything working except that, even when I'm in TV mode, the Select button operates the cable box.

I have the Select button on the remote mapped to the Ok function of the TV.

If I map some other key on my remote to the Ok function of the TV, that does send the Ok command to the TV. It's only a problem when I have it mapped to the Select button on the remote.

I can't see anything in IR or RM that might be causing this, but I'm far from the expert.

Any ideas?

Its a flaw in the Atlas. Use a keymove on the select button to get it to remain in TV mode.

vickyg2003 wrote:Its a flaw in the Atlas. Use a keymove on the select button to get it to remain in TV mode.

How do I do that?

I checked my other remote and that doesn't occur. I'll try looking at those files in the meantime.
EDIT: don't see anything obvious in the other remote's file.

I do want to use the Select button for Cable too. Don't want it hardcoded to just the TV.

Hopefully, it's something easy you can assist further with

EDIT 2: Figured out how to do the key move. Don't have a key move for the other remote, but maybe that was done some other way. Don't know.

Appears to be working nicely.

Thanks for the quick response.

Once I tweak some more, I'll upload my RM device upgrade.