JP1 Remotes

Posted: **Wed Dec 26, 2012 12:55 pm**

Hi All,

As mentioned in the Xmas thread - I got a new projector screen that includes an IR remote - but DecodeIR isn't finding anything!

1. Device: Favi projector screen
2. Type of device: Projector screen
3. Year: 2012
4. JP1/UEI Remote model: Atlas 5-day
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? Yes
11. Have you tried the JP1 Lookup Tool? Yes

Here is what the timing analysis has to say:

Code: Select all

41	CBL	Ch+		36697	Once:	+190 -1942; +1606 -570; +516 -1642; +1606 -570; +516 -1642; +1606 -570; +516 -1642; +1606 -570; +516 -1642; +1606 -570; +516 -1642; +1606 -570; +1606 -570; +1606 -570; +516 -1642; +516 -1642; +516 -1642; +516 -1642; +516 -1642; +516 -1642; +516 -16712;
Repeat:	+516 -1642; +1606 -570; +516 -1642; +1606 -570; +516 -1642; +1606 -570; +516 -1642; +1606 -570; +516 -1642; +1606 -570; +516 -1642; +1606 -570; +516 -1642; +1606 -570; +516 -1642; +1606 -570; +1606 -570; +1606 -570; +516 -1642; +516 -1642; +516 -1642; +516 -1642; +516 -1642; +516 -1642; +516 -16712;
42	CBL	Ch-		36529	Once:	+244 -1932; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +492 -1666; +492 -1666; +492 -1666; +492 -1666; +492 -1666; +1612 -564; +1612 -564; +546 -16680;
Repeat:	+492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +492 -1666; +492 -1666; +492 -1666; +492 -1666; +492 -1666; +1612 -564; +1612 -564; +546 -16680;
Extra:	+492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +492 -1666; +1612 -564; +546 -16680;
43	CBL	Stop		36697	Repeat:	+544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +544 -1614; +1634 -542; +1634 -542; +544 -1614; +544 -1614; +544 -1614; +544 -1614; +544 -16692; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +462 -130608; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +1634 -542; +544 -1614; +544 -1614; +1634 -542; +1634 -542; +544 -1614; +544 -1614; +544 -1614; +544 -1614; +544 -16692;

The learns work - but my primary remotes are not learners.

Thx!
xnappo

Posted: **Wed Dec 26, 2012 1:57 pm**

Oh cool, your going to share the fun with us.

I take it
Ch+ is putting it up
Ch- is putting it down
Stop is stopping it.

Its a lot easier for us if you just post the IR file with the learns. .

What are the target remotes? (Are you looking for JP1.2 support too?)

Any more commands? Or is this it, just the 3

Posted: **Wed Dec 26, 2012 2:35 pm**

I would need to see the IR file to do anything.

Posted: **Wed Dec 26, 2012 3:08 pm**

Hi Vicky/Rob,

Here is the .rmir file:

http://www.hifi-remote.com/forums/dload ... e_id=11618

I use an Atlas OCAP (3033) so 1.3 support only...

Vicky - yes those are the commands, and just the three!

Thanks!

xnappo

Posted: **Wed Dec 26, 2012 4:37 pm**

Here, try this...
http://www.hifi-remote.com/forums/dload ... e_id=11619

Posted: **Wed Dec 26, 2012 5:07 pm**

The Robman wrote:Here, try this...
http://www.hifi-remote.com/forums/dload ... e_id=11619

Perfect Rob - thanks!

Merry Xmas!

xnappo

Posted: **Thu Dec 27, 2012 4:47 am**

Wow, I'm impressed. You found that to be a binary signal, and got it to work on the first try. I didn't see that at all! Great job Rob.

Posted: **Thu Dec 27, 2012 10:59 am**

They were messy learns but I found a 24 bit string in each of them.

Posted: **Thu Jan 07, 2016 4:29 pm**

I have a motorized screen that appears similar to this one. I'm not sure what brand it is but it seems similar to the ones found inexpensively on ebay.
I'm posting the link to the learned signals in hope that someone can convert them to a device upgrade.
http://www.hifi-remote.com/forums/dload ... e_id=13840

Posted: **Thu Jan 07, 2016 5:52 pm**

Here ya go...
http://www.hifi-remote.com/forums/dload ... e_id=13841

Posted: **Fri Jan 08, 2016 12:03 am**

That was quick and works perfectly.

Many thanks Rob!

Posted: **Sat Jan 09, 2016 1:32 pm**

dnick wrote:That was quick and works perfectly.

Many thanks Rob!

Although this upgrade works great with my ARRX18G, I can't seem to get it to work with my URC-6440 with extender 1.04. I get an error message which states the following:
"The selected protocol "Manual Settings" (01 FF) is not compatible with the selected remote. This upgrade will NOT function correctly. Please choose a different protocol."

Is there something that I can do to get this device upgrade to work on my URC-6440?

Posted: **Sat Jan 09, 2016 2:24 pm**

The executor that I wrote is for remotes with a S3C8 or S3F8 processor, the URC-6440 has a MAXQ processor and I don't know how to write executors for that.

Posted: **Sat Jan 09, 2016 5:44 pm**

Give this a try.

Posted: **Sun Jan 10, 2016 1:48 am**

3FG wrote:Give this a try.

This file works fine with the URC-6440. Thanks!

JP1 Remotes

FAVI Entertainment projector screen

FAVI Entertainment projector screen