|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
bvwelch
Joined: 21 Apr 2005 Posts: 35
|
Posted: Fri Dec 07, 2012 4:33 pm Post subject: switching from 6131 to RCRP05B - is this approach reasonable |
|
|
Greetings,
Back in 2005, I was very happy to use JP1 and an extender for my 6131, to control a Sony TV, Sony STR-DE995 receiver, and Panasonic DMR-E85H pvr.
Now we just bought a Vizio E320-A0 TV, and replaced our worn-out 6131 with the RCRP05B.
I have original OEM remotes for all equipment. I can also set up JP1xxx cables and an IR Widget if needed.
But first, I wanted to see what the RCRP05B could do, with just manual programming.
My first surprise is with the Sony receiver -- I don't think the RCRP05B has the setup code that I was using in the 6131... In particular I need to be able to switch my receivers audio input from either the TV or the PVR, or the receiver's own radio...
Am I right in thinking that I am going to need the cables and cannot program a button manually for this function?
Eventually, I would like each of the device buttons to automatically select the proper audio input for the receiver, like on the 6131, but I can live without that for now.
Thanks for any suggestions. |
|
Back to top |
|
|
MaskedMan Tivo Expert
Joined: 10 Feb 2004 Posts: 1006 Location: Boone, IA |
Posted: Fri Dec 07, 2012 4:41 pm Post subject: |
|
|
If the sony is still set to the default codeset AV2, then code 1758 in the RCA remote should control it. If the 0-9 keys don't control any inputs on the stereo, its probably due to CH lock set on the rca remote.
To unlock the CH lock:
1. aud
2. press and hold SEUP, for two blinks
3. enter 9 7 3
4. press CH DOWN _________________ Edmund |
|
Back to top |
|
|
bvwelch
Joined: 21 Apr 2005 Posts: 35
|
Posted: Fri Dec 07, 2012 5:08 pm Post subject: |
|
|
MaskedMan wrote: | If the sony is still set to the default codeset AV2, then code 1758 in the RCA remote should control it. If the 0-9 keys don't control any inputs on the stereo, its probably due to CH lock set on the rca remote.
|
Thanks that worked! |
|
Back to top |
|
|
bvwelch
Joined: 21 Apr 2005 Posts: 35
|
Posted: Sun Dec 09, 2012 10:54 pm Post subject: |
|
|
I was able to get the new remote basically talking to the TV, PVR, and Receiver, so I built new / modern cable for the 6131 (using Arduino) and also an FTDI cable for the RCA remote. Both are working, and I used RMIR to grab the contents of both remotes.
I used an extender in the old remote, and I plan to use an extender in the new remote also. So, I followed the instructions on making getting the extender into the new remote, activated it, and tested that I can still operate the TV, PVR, and Receiver.
Now I am trying to get the contents of the old remote into the new one, using RMIR. I realize that there will be issues: 1) different/missing buttons on the new remote, and 2) the extenders have different rules, conventions, features.
Using RMIR, I opened up file from the old remote, selected the PVR button, then clicked EDIT, and saved the upgrade to a file. then I ran RMIR on the file for the new remote, clicked the Devices tab, then click NEW, then opened the upgrade that I just created.
I did this for the PVR and the Receiver, and I (temporarily) ignored the warnings about "lost function assignments", saved everything in a new combined file.
Does this seem a good approach? Next I plan to decide about the missing / buttons, and then, last but not least, I want to set up the Device buttons as 'remote theatre' buttons.
I'll have to go dig up some discrete codes for the new TV though -- on, off, and change the input between PVR and live TV.
thanks to all for the really great tools and documentation here! |
|
Back to top |
|
|
andyross
Joined: 13 Jun 2004 Posts: 261 Location: Aurora, IL |
Posted: Sun Dec 16, 2012 9:41 am Post subject: |
|
|
I moved from an 8910 to the RCA. Luckily, the extender 'language' was nearly the same, so it was generally easy to recreate things. The RCA was even nicer as the extender has support for discrete power by name instead of having to remember what weird keypress I tied them to.
The only issue I have is that my Onkyo receiver uses some extremely oddball codes for certain Internet/iPod features. I don't use them much, and end up using the original remote for that (which is confusing as that remote's keys change what they do depending on the device selected!) |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Sun Dec 16, 2012 2:36 pm Post subject: |
|
|
I believe that we have support for any signal accepted by Onkyo receivers, at least the TX- or DTR- series. Tell us which functions are a problem, and maybe we can suggest how to get them working. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|