JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Arduino sketch to generate raw code for use with IR Scope
Goto page Previous  1, 2, 3, 4, 5
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Software
View previous topic :: View next topic  
Author Message
probono



Joined: 12 Aug 2012
Posts: 48

                    
PostPosted: Sun Apr 20, 2014 6:03 am    Post subject: Re: Arduino sketch to generate raw code for use with IR Scop Reply with quote

Exciting development in this thead Smile

Just found this now. I will try to catch up asap. In the meantime, I found this question:

NEC1 wrote:
If you have not done so, are there plans to incorporate the IR sender and receiver program in the same Arduino board (of which the mode can be selected with a serial port command e.g. "RX" for IR receiving mode and "TX" for IR transmitting mode)?

I am using this sketch and it is working for me (but likely it should be prettified):

https://gist.github.com/probonopd/5793692#file-sendandreceive-ino

Send Pronto Hex via an IR LED connected to Arduino Pin D9. Make sure you do not send a blank (" ") as the last character. For example, to send Sony12, device = 1, obc = 47:
Code:
SEND 0000 0067 0000 000d 0060 0018 0030 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 03de
Back to top
View user's profile Send private message
Barf
Expert


Joined: 24 Oct 2008
Posts: 1402
Location: Munich, Germany

                    
PostPosted: Sun Apr 20, 2014 8:39 am    Post subject: Reply with quote

Hi Probono,

nice to hear from you again.

Next version of IrScrutinizer (1.0.2 or possilbly 1.1.0) will come with one Arduino sketch good for both sending and capturing. Due "real soon now". Basically, I am implementing a simple case of the Girs specification..
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Barf
Expert


Joined: 24 Oct 2008
Posts: 1402
Location: Munich, Germany

                    
PostPosted: Sat Jun 21, 2014 2:28 am    Post subject: Reply with quote

As described in another thread, IrScrutinizer 1.1.0 has been released. It contains a sketch that, as per above, will both send and capture. The capture is based on MikeT's work, for the sending part, I am now using Chris Young's IrLib, which is based upon Ken Shirriff's library.

It has been tested on Arduino Uno, Nano, Lenoardo, Micro, Mega2560.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Barf
Expert


Joined: 24 Oct 2008
Posts: 1402
Location: Munich, Germany

                    
PostPosted: Fri Jan 08, 2016 3:04 pm    Post subject: Reply with quote

Hi again,

Here is a fairly detailed DIY guide for an Arduino nano clone based board, for the price of a small pizza. It incorporates most of the stuff mentioned in this thread, including a further developments of MikeT's excellent work.

It uses my own Arduino software AGirs and Infrared4Arduino instead of IRLib.

It is primarily geared to be used with IrScrutinizer and Lirc (driver contained in Lirc 0.9.4), but other usages are also possible.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Software All times are GMT - 5 Hours
Goto page Previous  1, 2, 3, 4, 5
Page 5 of 5

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control