Page 1 of 1
slingbox binary for new Octagon SF 918G SE+ HD
Posted: Sun Aug 05, 2012 9:49 pm
by hexman
can someone pleeeease help me with
slingbox binary for new Octagon SF 918G SE+ HD
Posted: Sun Aug 05, 2012 10:02 pm
by vickyg2003
Posted: Mon Aug 06, 2012 2:25 pm
by hexman
yes i remember you give me that file before, you very good at this hehe,
soory...i meen Alan R
but that file is for sf 918 hd, my new stb is 918G !
But maybee work, anyway have different remote to that two stb.
Ok, i will try for ordinary 918 HD
Posted: Mon Aug 06, 2012 2:52 pm
by The Robman
hexman wrote:but that file is for sf 918 hd, my new stb is 918G !
But maybee work, anyway have different remote to that two stb.
Ok, i will try for ordinary 918 HD
Can you use the 918hd remote with the 918g? If you can, the old bin file will work. If you can't, it won't.
Posted: Mon Aug 06, 2012 3:00 pm
by hexman
The Robman wrote:hexman wrote:but that file is for sf 918 hd, my new stb is 918G !
But maybee work, anyway have different remote to that two stb.
Ok, i will try for ordinary 918 HD
Can you use the 918hd remote with the 918g? If you can, the old bin file will work. If you can't, it won't.
No, remote bin for 918HD wont work for 918G, but work with old 918HD
so because that i ask for help for new remote .bin file for my brand new 918G
Posted: Mon Aug 06, 2012 3:23 pm
by The Robman
I'm not asking about bin files. I'm asking, can you use the physical remote that came with the 918hd on your 918g stb?
Posted: Tue Aug 07, 2012 9:48 am
by vickyg2003
Amazon.de is selling a replacement remote stating it controls the following models
Remote control for Octagon SF 918 + SE, SE + 918G, 1008, 1008SE, 1008SE +, 1008P, 1008C, 1008g, 1018 and SF-1028P HDTV
I think that would indicate that this BIN should fit. Are you sure your blasters are firing, and your placement is good?
Posted: Tue Aug 07, 2012 10:38 am
by The Robman
But first things first, he should confirm whether the physical remotes are interchangeable
Posted: Thu Aug 16, 2012 12:29 pm
by hexman
The Robman wrote:But first things first, he should confirm whether the physical remotes are interchangeable
if you read up, then you will see what i ask for !?
918GSE
Posted: Thu Aug 16, 2012 12:42 pm
by hexman
slingbox remote .bin problem solved.
.bin for 918SE will not work, but .bin for 1018 work
Posted: Thu Aug 16, 2012 5:10 pm
by The Robman
Just FYI, the SF-1008 and SF-1018 IR both use NEC1 dev 2.249 (and they use the same OBCs). The SF-918HD uses NEC1 dev 4.112 with different OBCs.