JP1 Remotes

Hello everyone.

I've recently purchased theSanDisk SDMV1-R V-Mate Video Memory Card Recorder from ebay.

I live inside Brasil, where it's hard to find a support to connect with my Slingbox AV / USA.

I have NOT searched the last remote control files to make it work with my slingbox AV.


And i can't really find any files posted anywhere regarding this SDMV1.

I was hoping that maybe someone has created ( Cxxxx PL.bin), a file for themselves for that particular V-Mate and was willing to share it with me, or maybe create one for me?

If so, please tell me if you need anymore.

Your Regards JR.

jrbusca wrote:I have NOT searched the last remote control files to make it work with my slingbox AV.

And i can't really find any files posted anywhere regarding this SDMV1.

I couldn't find a direct match for the SDMV1 but there's a listing on the Harmony Database ( http://www.logitech.com/harmony/components ) for the SanDisk SDV1-R which interestingly enough is listed in their Computer category.

• rmdu: http://www.hifi-remote.com/forums/dload ... le_id=9922
• bin, rmdu, and ict: http://www.hifi-remote.com/forums/dload ... le_id=9923

Thank you, eferz !

Unfortunaly it NOT works or me.

C2011_PL.bin for Sandisk V-Mate, not working with my slingbox A/V 2008, i do NOT know what happen.

I you have other file, i give a try.

Thank you!

jrbusca wrote:Unfortunaly it NOT works or me.

Please explain further. Does that mean the Slingbox didn't accept the upgrade file, or does it mean that the file was accepted but it did not control the device?

Hello, The Robman

Thank's for your help

1 - I have download the file (c2011_pl.bin),

2 - move the file (c2011_pl.bin) to SBAV folder

3 - start slingbox configuration

4 - choose other equipment

5 - chose other remte control

6 - type in the window C2011

7 - slingbox configure the C2011, file was accepted

8 - try it pressing power button, it did not control the device

nothing happens !

accept every changes and try to use Sling with Sandisk, file was accepted but it did not control the device.

Please Robman, help me with this situation, I really need it working with slingbox!

V-mate Model
Sandisk
model number SDVM1
Part Number 20-90-03081
Firmware vmate_0207.b8

Thank you very much for this help and this forum, I count on you!

I searched the forum and I see that this exact model has been discussed before here:
http://www.hifi-remote.com/forums/viewtopic.php?t=11320

and an upgrade file was created here:
http://www.hifi-remote.com/forums/dload ... le_id=7180

So, I have converted that upgrade to a Slingbox bin file and loaded it here:
http://www.hifi-remote.com/forums/dload ... le_id=9939

Give it a try.

Just for the record, this upgrade uses the Aiwa protocol with a device code of 352 (in KM) or 96.1 (in RM)

I see that the RDMU file in the zip file, doesn't match the device/subdevice shown in the ICT files.

Hello, how are you?

I really need your help!!

I am working in a Non governamental organization, inside Amazon, and I am only this week at Manaus, the capital, and right now i have plenty of internet connection, and I am counting on you guys to help me.

Please, I really need the cxxxxpl.bin correct for my "Sandisk sdmv1-R V-mate Video Memory Card Recorder" to work?

Can you help me!! Thank you!

jrbusca, I posted some bin files for you to try back in September and we never heard back from you.

Hello Great Rob man, how are you?

I dowloaded again the link after your message, and this time the file was not corrupted, like the first one.

You are awsome man.

I didn't answer you before because I had a huge problem at my computer.

I will test all the buttons right now.

Thank you

jrbusca wrote:I dowloaded again the link after your message, and this time the file was not corrupted, like the first one.

The first file isn't corrupted. What are you referring in regards to corruption?

Hello, Eferz, the Robman, vickyg2003,

First of all thank you guys so much, you don't have idea how long i've been waiting for this solution.

If I didn't express myself well, I am really glad of your help.

The file works properly in my v-mate+sling.

The first time I have a problem with the file because I have a satelite connection with really slow speed (300k), and probably this ocurred the file to be incomplete.

But now that I am at the capital I could work it out properly.

Thank you all so much

jrbusca wrote:Hello, Eferz, the Robman, vickyg2003,

First of all thank you guys so much, you don't have idea how long i've been waiting for this solution.

If I didn't express myself well, I am really glad of your help.

The file works properly in my v-mate+sling.

The first time I have a problem with the file because I have a satelite connection with really slow speed (300k), and probably this ocurred the file to be incomplete.

But now that I am at the capital I could work it out properly.

Thank you all so much

Excellent. Thank you very much on the feedback.