|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
huestifer
Joined: 24 Jun 2011 Posts: 6
|
Posted: Tue Jul 19, 2011 2:57 pm Post subject: A little help needed with Samsung Blueray upgrade |
|
|
This is my first upgrade and I'm having a little trouble getting the right output from my remote.
I captured the OEM remote's signals using IRscope and then I exported them into RM and assigned my functions to the buttons on my JP1 remote. Everything looked good and after uploading my upgrade to my JP1 remote it still wouldn't control the Blueray player.
So, I tried comparing the signal from my upgrade and the signal from the OEM remote in IRscope and there is a slight difference in the output but I'm not sure what to change in my upgrade in order to correct this issue.
Here is the difference in the outputs:
Here is the IRP Form from IR Scope.
OEM:
{37.7k,504,msb}<1,-1|1,-3>(9,-9,A:16,1,-9,B:20,1,-57.7m)+{A=0b0000010000000000,B=0b11101011110001000011}; Alt leadout form: ^121m
JP1 Upgrade:
{38.0k,495,msb}<1,-1|1,-3>(9,-9,A:16,1,-9,B:20,1,-61.2m)+{A=0b0000010000000000,B=0b00001011110001000011}; Alt leadout form: ^120m
Any ideas? The only thing I can think of is that I assigned my own 4 digit set-up code to the upgrade. Would that affect the remote's output if I used the OBC as the info for the functions?
Just in case:
--------------------------
1. Device: Model= BD-D5250C/ZA
2. Type of device:Blue-Ray Player
3. Year:Manufacture date- March 2011
4. JP1/UEI Remote model: Atlas DVR 1055 Time Warner Cable Remote -non Learning (uses JP1.3)
5. Do you have a JP1 cable? yes 1.2/1.3
6. Still have original remote? Yes
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? I just bought an IR Widget. My remote is not a learner.
11. Have you tried the JP1 Lookup Tool? yes
--------------------------
Let me know if there is any other info you need.
Thank you.
-Huey |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Jul 19, 2011 3:43 pm Post subject: |
|
|
To see what went wrong, we need to see the ICT files produced from the captures and the RM file that you created from it.
It looks like you might be missing a parameter, but without seeing what you are working with its hard to tell. Typically Samsung Blue Ray Players use Samsung36 protocol. I believe the missing parameter is the E parameter. If this is a Samsun36, the first 4 bits of the part B would represent the E parameter. If this is lsb, which most signals are, then the value for E=7.
If we had your files we could give you a clearer answer.
Zip your files together and post them in the diagnosis section, and then post a link to that file here so we can have a look-see. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Tue Jul 19, 2011 4:17 pm Post subject: |
|
|
It's always easiest to start with an existing upgrade. Any of our samsung blu-ray files should get you at least 90% of the codes. My guess is you didn't load the protocol into your remote. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Jul 19, 2011 5:25 pm Post subject: |
|
|
Dave he's got the protocol loaded. You can see it from the raw IRP that Huey posted from IRScope.
I assume we called it Samsung36, because part A has 16 bits and part B has 20 bits, yielding 36 data bits. The Samsung20 has 20 data bits after all.
Samsung36
{38.0k,495,msb}<1,-1|1,-3>(9,-9,D:8,S:8,1,-9,E:4,F:8,F:8,1,-61.2m) _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
huestifer
Joined: 24 Jun 2011 Posts: 6
|
Posted: Tue Jul 19, 2011 6:22 pm Post subject: Hooray! |
|
|
You were right Vicky!
I had left the "E Protocol" field Blank.
I wasn't sure what went in there at first. So I figured I'd leave it blank
But now I see it written right in IR Scope under the Misc. column "E=7" Duh!
Thank you so much Vicky my new upgrade now works flawlessly.
Also I'd like to contribute it to the forum if it would be of use.
is there a link you could give me explaining how I would go about that.
Thank you very much for the pointer it was exactly what I needed.
Thank you Dave for the suggestion about using a similar upgrade as a starting point. I'll try that on my next one! |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Jul 19, 2011 6:36 pm Post subject: Re: Hooray! |
|
|
huestifer wrote: | But now I see it written right in IR Scope under the Misc. column "E=7" Duh!
|
Yeah it would have been easier to spot if we had your ICT files RDMU files.
Quote: |
Thank you so much Vicky my new upgrade now works flawlessly.
Also I'd like to contribute it to the forum if it would be of use.
is there a link you could give me explaining how I would go about that.
|
its really easy. Just navigate your way to the file section/DVD (bluray) folder and click the upload button. You might want to read this
creating a better upgrade _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Mon Aug 08, 2011 11:15 am Post subject: |
|
|
Hey Huey, I don't see your upgrade in the file section yet, do you need any further assistance with loading it? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|