|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
kovacslajcsi
Joined: 11 May 2011 Posts: 7
|
Posted: Sun May 15, 2011 7:30 am Post subject: DENON AVR-2802 Home theater receiver |
|
|
1. Device: DENON AVR-2802
2. Type of device: Home theater receiver
3. Year:2003
4. JP1/UEI Remote model: URC-8206 / OneForAll Kameleon
5. Do you have a JP1 cable? YES
6. Still have original remote? NO
7. Checked the file section? YES, found a partially working code
8. Checked Pronto file section (at R/C)? YES, found a code table..
9. Partially working setup code? AUD:0004,0160,0272,0273,0274,0771,1360,1434,2279,2857 best:1460 but just the main buttons
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? YES, the partially working setup codes where from the tool.
Hi,
I found a code at R/C, with all of the buttons of the original remote, but it is in Pronto format.
http://www.remotecentral.com/cgi-bin/codes/denon/avr-2802/page-1/
The code found here, in the file section is partially working. I upload them with IR.exe, the main functions are OK, but the OSD, and programing part of the receiver is unavailable without the missing buttons. (Only 20 commands are in the file, the original remote has 56 commands)
I'm an absolute beginner, it's my firt try with this type of remotes.
Thanks for any kind of help! |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun May 15, 2011 8:29 am Post subject: |
|
|
The pronto hex is really easy to work with. You just add them as learns in IR and the codes are calculated for you.
Data shown in the grid
function, efc, 5-efc, dev, protocol, OBC
Code: | function efc 5-efc dev protocol obc hex
power on 209 01981 2 Denon 225 B8 78
powr off 207 01917 2 Denon 226 B8 B8
0 050 01993 2 Denon 207 B8 0C
1 211 02045 2 Denon 227 B8 38
2 047 01897 2 Denon 202 B8 AC
3 176 01945 2 Denon 197 B8 5C
4 049 01961 2 Denon 201 B8 6C
5 044 01801 2 Denon 204 B8 CC
6 179 02041 2 Denon 195 B8 3C
7 048 01929 2 Denon 205 B8 4C
8 172 01817 2 Denon 196 B8 DC
9 111 01905 2 Denon 210 B8 B4
10+ 046 01865 2 Denon 206 B8 8C
yellow 115 02033 2 Denon 211 B8 34
shift 048 33929 12 Denon 205 C8 4C
channel up 110 33873 12 Denon 214 C8 94
channel down 112 33937 12 Denon 213 C8 54
rewind 110 34129 8 Denon 214 E8 94
fast fwd 114 34257 8 Denon 215 E8 14
stop 113 34225 8 Denon 209 E8 74 |
_________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Last edited by vickyg2003 on Sun May 15, 2011 9:37 am; edited 1 time in total |
|
Back to top |
|
|
kovacslajcsi
Joined: 11 May 2011 Posts: 7
|
Posted: Sun May 15, 2011 9:14 am Post subject: |
|
|
Hi,
I need to connect the remote, then open IR, Learned signals-->Add-->device: AUD, key: The key on the remote, format-->Pronto --> then I copy the sequence form RemoteCentral, then OK, and i need to repeat this step for all of the keys?
then Upload it, and ready to use?
so simple? |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun May 15, 2011 9:34 am Post subject: |
|
|
kovacslajcsi wrote: | Hi,
I need to connect the remote, then open IR, Learned signals-->Add-->device: AUD, key: The key on the remote, format-->Pronto --> then I copy the sequence form RemoteCentral, then OK, and i need to repeat this step for all of the keys?
then Upload it, and ready to use?
so simple? |
Well yes and no.
The great tools hear make this so simple. Learned keys are really memory hogs, so what you want to do is make an upgrade from the learns.
I used IR to translate the codes into information that you can use to build an upgrade although you can use these as learns.
The Java program RemoteMaster(RM) or the Excel Worksheet KeymapMaster(KM) can create an upgrade for you. An upgrade is in essense a new setup code.
So you create a new upgrade, copy it into IR and assign it to a key.
Again so simple but a better practice. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
kovacslajcsi
Joined: 11 May 2011 Posts: 7
|
Posted: Mon May 16, 2011 12:55 am Post subject: |
|
|
Hi,
Sorry, but i have problems again.. What i did:
downloaded RM, assigned the RDF's, and opened IR, then Learned signals tab, copied the first pronto code (power button) from RemoteCentral, then OK button.
Now, there is a line in IR for the first button, the power button. Then i tried to copy the data to RM. On the first page I found my remote, URC-8206, device type: AMP. On the functons TAB i searched for the power button, and tried to import the data from IR, but i failed. I clicked into the EFC field, and entered 246, then hex: 87, but in IR, the value for the OBC filed is 225, and RM tells me, that the maximal value for this field is 127.
Why? |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Mon May 16, 2011 2:25 am Post subject: |
|
|
First, some basic information about how JP1 remotes work in relation to IR signals.
The IR signal for Power On for the AVR-2802 is Denon IR protocol, device 2, and function number 225. In JP1-speak, the function number is frequently called the OBC.
The remote sends IR signals using a protocol executor, which is just a subroutine in the microprocessor firmware. The subroutine is called with data. In JP1-speak, we refer to fixed data, which is the same for all functions, and some variable data, which we call Hex data. The EFC is an encoded representation of the Hex data, and generally unless you intend to manually program a remote, you should ignore and not use EFCs. Specifically, when you decode Pronto Hex data, you should only pay attention to the OBC, and ignore the EFC and Hex data.
In fact, showing an EFC or Hex data as part of a IR decode is a hangover from much simpler days, when UEI remotes could send Denon IR signals in only one way-- using the protocol executor that we call Denon. That executor takes one byte of Hex Data, and can only be used with one device number. These days, most people will need to use a different executor, which we call Denon Combo (Official). It uses 2 bytes of Hex data, and can specify a device number and OBC for each function.
That's the excecutor you need, since your receiver uses more than one device number.
Now for your particular problem, I guess that you didn't select a protocol executor on the Setup tab before entering the Functions tab. It is necessary to specify the executor first. However, once you have specified an executor, you only need to enter the OBC. RM will calculate the Hex data and associated EFC for you.
So:
In RM, on the Setup Tab, choose your remote, select a Device Type, and make up a Setup Code, e.g. 1560.
Select the Protocol (short for protocol executor) to be Denon Combo (Official). Don't use either Denon, which is limited to one device number, or Denon Combo, which is an executor that isn't built into your remote.
Now on the functions tab, enter device 2 and OBC 225. The EFCs and Hex data will be 01981, 209, and B8 78.
Now you can do the rest of the functions. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Mon May 16, 2011 6:05 am Post subject: |
|
|
kovacslajcsi wrote: |
Then i tried to copy the data to RM. On the first page I found my remote, URC-8206, device type: AMP.
| Device type is an unimportant field. For the most part device types just effect which keys are active for the setup code. However it is important to choose a protocol on this page. The protocol in this case would be the Denon Combo(Official).
Quote: |
On the functons TAB i searched for the power button, and tried to import the data from IR, but i failed. I clicked into the EFC field, and entered 246, then hex: 87, but in IR, the value for the OBC filed is 225, and RM tells me, that the maximal value for this field is 127.
Why? |
Just use the device and OBC code and let the tools calculate the EFC. EFC's are dependent on the executor and will be different if you use the Denon or the Denon Combo or the Denon Combo (Official). _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
kovacslajcsi
Joined: 11 May 2011 Posts: 7
|
Posted: Wed May 18, 2011 12:13 pm Post subject: |
|
|
Hi,
today, i had some freetime, i tried what You wrote, but the remote does not work..
the file, for RM can be found here:
https://rapidshare.com/files/2612469817/Denon_AVR-2802.rmdu
I used the Denon Combo(Official) protocol.
When i test the buttons, with the new setup code, the remote works, emmits IR signals, just it does not work with my amplifier.. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Wed May 18, 2011 3:42 pm Post subject: |
|
|
Please upload your file to the diagnosis section in our File Section. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Wed May 18, 2011 7:13 pm Post subject: |
|
|
Actually, we need both the rmdu file and the IR file, or if you're using RMIR, the rmir file. That way we can see everything.
Upload the the File Section, Diagnosis. |
|
Back to top |
|
|
kovacslajcsi
Joined: 11 May 2011 Posts: 7
|
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Thu May 19, 2011 5:34 am Post subject: |
|
|
The files don't match.
The upgrade is for an audio device setup /1599
The IR file has one upgrade the /1161. From what I can tell the 1161 is the 1599, but the 1161 is not assigned to a button, so it can't work.
On the General tab in IR assign the audio code to a button. IR 8.03 has a code selector in the toolbar to help you find the correct upgrade. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
kovacslajcsi
Joined: 11 May 2011 Posts: 7
|
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Thu May 19, 2011 8:14 am Post subject: |
|
|
THe IR file has two upgrades loaded:
1161 which is a Denon Combo Official upgrade
1599 which is a Manual Settings executor, but the corresponding executor isn't loaded. So there is no way it will work at present, because 1599 calls for a non-existant protocol executor.
Incidently, this information is trivial to see uing RMIR, and less obvious using IR.exe. I think RMIR is much easier to use. |
|
Back to top |
|
|
kovacslajcsi
Joined: 11 May 2011 Posts: 7
|
Posted: Fri May 20, 2011 11:19 am Post subject: |
|
|
Hi,
I downloaded the RMIR, now i see, what You mean.. after setting it to denon combo (offcial), and uploading it to the remote, it works
All buttons, except 5 or 6 buttons, and one of them is the OSD on button.. I tried 3 times to convert it, but it is the same..
It seems, that on RC the pronto code is wrong for this buttons. But the main problem is solved, the remote is working.
Thanks! |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|