JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

panasonic mix combo based upgrades?

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
greenough1



Joined: 30 Jan 2005
Posts: 659

                    
PostPosted: Thu Apr 21, 2011 11:36 am    Post subject: panasonic mix combo based upgrades? Reply with quote

Hi,
I hope I'm posting this in the correct subforum. I just got a new panasonic plasma 50ST30 and panasonic blu-ray player. There are good existing upgrades I used to start with:

PLASMA UPGRADE
BLU-RAY UPGRADE

I learned all the keys for the blu-ray player and see in IR (learn tab) that the differences are in the subdevice number for some learned keys; all have the same device number. I'm a bit foggy this a.m., but recall most keys are subdevice 0, and a few are subdevice 1.

My question is how do I indicate the subdevice for a specific button in KM (9.14) for this protocol (panasonic MIX Combo) on the functions tab, I think it is? I might have just not spent enough time looking at the features of KM, so apologies if I overlooked something simple.

I also note that the remote for the TV has a couple of buttons not found in the PLASMA UPGRADE link above that I'd like to add. I prefer to do this in the KM upgrade, rather than as a keymove in IR. so this is why I'm trying to understand how to build this upgrade from scratch by learning all the keys from the remote.

Best and thanks,
jeff

The goal
Back to top
View user's profile Send private message
ElizabethD
Advanced Member


Joined: 09 Feb 2004
Posts: 2348

                    
PostPosted: Thu Apr 21, 2011 12:21 pm    Post subject: Reply with quote

From the Protocol Help sheet for Panasonic MIX Combo:
Quote:
Enter your device and sub-device codes in the "device code" cells on the Setup sheet, then
when you enter your function codes, in the byte2 column, enter a number (1 thru 5) to
select a device code, followed by a space, then another number (2 thru 6) to select a
sub-device code.

I haven't used this file.
Notes on the Setup sheet indicate you may need to paste a protocol in IR.
Whether you really have to use MIX Combo, I'm not sure.

Regardless, make sure you select OBC not EFC, and if a code is for 128.9, then you will enter 1 4, and if it's 128.4 you will enter 1 3
You can actually see the subdevices listed on the Functions sheet Notes.

If you then want to make keymoves to device other than TV, you can do that on the Keymove sheet and don't forget to bring it into IR. Though recheck it works. At some point IR didn't like those keymoves.
_________________
Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride Smile
Back to top
View user's profile Send private message
greenough1



Joined: 30 Jan 2005
Posts: 659

                    
PostPosted: Thu Apr 21, 2011 2:31 pm    Post subject: Reply with quote

Hi Liz,
I figured I just didn't look hard enough at it. You've pointed me in the right direction, so I should have good upgrades for the player and TV really soon.

Best,
jeff
Back to top
View user's profile Send private message
gfb107
Expert


Joined: 03 Aug 2003
Posts: 3411
Location: Cary, NC

                    
PostPosted: Thu Apr 21, 2011 3:31 pm    Post subject: Reply with quote

The combo protocols are much easier to use in RM than they are in KM.
_________________
-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)
Back to top
View user's profile Send private message Visit poster's website
greenough1



Joined: 30 Jan 2005
Posts: 659

                    
PostPosted: Fri Apr 22, 2011 12:11 am    Post subject: Reply with quote

Thanks Greg. New upgrade uploaded based on entire remote functionality.

Panasonic Blu-ray player DMP-BDT110

Best,
jeff
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Fri Apr 22, 2011 10:41 am    Post subject: Reply with quote

Thanks Jeff. Would you please update your upload to include the appropriate KM or RM icon?
Back to top
View user's profile Send private message
greenough1



Joined: 30 Jan 2005
Posts: 659

                    
PostPosted: Fri Apr 22, 2011 11:09 am    Post subject: Reply with quote

Hi mdavej,
Sorry for that. I've updated the file type icon.
Greg was right that RM handled the protocol very easily.

Best,
jeff
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control