JP1 Remotes

Hello All,

This post is going to be a running list of things to do for the next RDF release.

Note that I will be liberally editting/deleting posts in this thread as issues are closed to keep it clean, so don't be offended.

Here is the list I have for the next release:

• - Fix the DeviceButtons not matching Devices? We need some sort of algorithm to do this.

Please let me know anything I missed!

xnappo

vickyg2003 wrote:
The device verification on these remotes and their extenders was incorrect in dm2.01 so these need to be manually removed by hand so the update can be rerun. I think I may have submitted the corrections for the 11781178 when I was working on the extender.

Can you possibly add a check of the RDF setup codes vs. dm in the future? I think I got the associated extenders for the remotes you mentioned, but it is hard to be sure.

Thanks,
xnappo

All, I will probably wait to do another full release until we get some 1.4/2.x RDFs completed, but please log any known RDF changes in this thread!

Thanks!
xnappo

Newer version of RDFs:
RCRP05B adds Daniel Eble's enumeration of global punch through and corrects PID 01A4 to 01A4:2
Atlas3033 changes to allow RMIR to make a new remote image
URC-7555 added necessary blank line between sections
URC-8820N,etc corrects PID 01A4 to 01A4:2
329801 OneForAll OARI06G JP1.4
322403 (URC-7960) JP1.4
253602 URC-8820 RDF JP2
201009 Atlas 1056B03 JP2
311902 (Titan URC-2056-I) JP1.4

3FG wrote:Newer version of RDFs:
329801 OneForAll OARI06G JP1.4
322403 (URC-7960) JP1.4
253602 URC-8820 RDF JP2
201009 Atlas 1056B03 JP2
311902 (Titan URC-2056-I) JP1.4

Not sure if these should be included with the main distribution until RM/RMIR goes live for JP1.4 & JP2.x support. As the current supported Remote Master 2.02 version pukes java errors with these RDFs installed. In some cases, it even causes it to crash.

Hi,
Not sure where (or even whether) I should post this small "fix" but here goes.
The ".map" files for the URC-8040 Euro Kameleon have the location of the Volume and Channel buttons incorrectly "swapped".

The current released map files (version 1.32) have:-
circle VOL+ 31,209 42,220
circle VOL- 31,246 42,257
circle CH- 120,246 131,257
circle CH+ 119,209 130,220

I've amended all mine to :-
circle CH+ 31,209 42,220
circle CH- 31,246 42,257
circle VOL- 120,246 131,257
circle VOL+ 119,209 130,220

and they now look right and work correctly for me.

(They all worked correctly before, but hovering over the "picture" of the volume keys popped up labels CH+ and CH-. As long as I assigned the channel functions to these keys it was OK but just didn't look right.)
Lester